Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please check the Forum Guidelines at the top of the Newbie section

Pages: 1 [2]  All   Go Down

Author Topic: 3.2 auto to manual convertion  (Read 1715 times)

0 Members and 1 Guest are viewing this topic.

scimmy_man

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • yorkshire
  • Posts: 1111
    • View Profile
Re: 3.2 auto to manual convertion
« Reply #15 on: 01 October 2010, 09:55:38 »

Quote
Quote
yes, I just didn't remove it yet, do you think if this was removed the lights would go out..?

Ok. The gearbox ECU will be doing its' nut because it's not connected to a gearbox any more and it's asking the engine ECU to report a problem.

I think you will still get problems with the ECU removed. The other ECUs will expect it to be on the CAN bus and will raise a fault if they can't see it.

The proper solution is to reconfigure the engine and ABS/TC ECUs.

I believe non-DBW models used a more primitive form of signalling which probably doesn't detect the missing ECU.

Kevin

clear as mud ;D
Logged
Pages: 1 [2]  All   Go Up
 

Page created in 0.023 seconds with 17 queries.