Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[zirk]

Looking at removing 2015, Telematics and GID in favor of 2006 and MID on a 3.2 that was factory fitted in 2001, all non Bose.

Whats the chance of a straigth swop with the wiring, or easy mods or just a non starter.

Thanks Chris.   

[RobG]

Two extra wires to run Chris and swap the stalk for the "button" one

[zirk]

Two extra wires to run Chris and swap the stalk for the "button" one

Ok, thanks Rob, stalks easy enough, any idea on the 2 extra wires and what there for?

[RobG]

Two extra wires to run Chris and swap the stalk for the "button" one

Ok, thanks Rob, stalks easy enough, any idea on the 2 extra wires and what there for?

Think it might be 3 Chris, they run from the MID to the relacement stalk. TB knows which pins

[TheBoy]

2 wires from MID to stalk, and a 3rd from an grounding point behind the dash to the stalk.

I'll dig out pins if thats the line you are going down.

[zirk]

Two extra wires to run Chris and swap the stalk for the "button" one

Ok, thanks Rob, stalks easy enough, any idea on the 2 extra wires and what there for?

Think it might be 3 Chris, they run from the MID to the relacement stalk. TB knows which pins

Cheers again Rob, hopefully TB may read and post up, when His not too busy.
 

[TheBoy]

Two extra wires to run Chris and swap the stalk for the "button" one

Ok, thanks Rob, stalks easy enough, any idea on the 2 extra wires and what there for?

Think it might be 3 Chris, they run from the MID to the relacement stalk. TB knows which pins

Cheers again Rob, hopefully TB may read and post up, when His not too busy.
 

Keep up

[RobG]

Two extra wires to run Chris and swap the stalk for the "button" one

Ok, thanks Rob, stalks easy enough, any idea on the 2 extra wires and what there for?

Think it might be 3 Chris, they run from the MID to the relacement stalk. TB knows which pins

Cheers again Rob, hopefully TB may read and post up, when His not too busy.
 

Keep up

Chris is getting on a bit mind TB

[zirk]

2 wires from MID to stalk, and a 3rd from an grounding point behind the dash to the stalk.

I'll dig out pins if thats the line you are going down.

Ahh, you beat me to it, on the mobile, thanks Jamie would appreciate that.

Chris     

[RobG]

2 wires from MID to stalk, and a 3rd from an grounding point behind the dash to the stalk.

I'll dig out pins if thats the line you are going down.

Ahh, you beat me to it, on the mobile, thanks Jamie would appreciate that.

Chris     

Any old excuse

[zirk]

Two extra wires to run Chris and swap the stalk for the "button" one

Ok, thanks Rob, stalks easy enough, any idea on the 2 extra wires and what there for?

Think it might be 3 Chris, they run from the MID to the relacement stalk. TB knows which pins

Cheers again Rob, hopefully TB may read and post up, when His not too busy.
 

Keep up

Chris is getting on a bit mind TB

Fingers work, mobile works, brain works most of time, its the getting it to happen together, multitasking, that lets me down.

[doz]

Any reason why you'd do this swap? Just curious

[zirk]

Any reason why you'd do this swap? Just curious

Yep

[zirk]

Any reason why you'd do this swap? Just curious

Ok, being serious now, where doing a wacky rally to Barcelona for Help the Hero's, at the moment its a toss up between sending  a 3.0 Ex plod manual or a 3.2 Auto, so will be Tom Tom most of way as the NCDC isnit working as it should and does not cover up to date Europe.

Chris      

[MaxV6]

Hmmm....   i have a home looking for a telematics.....   


i also have a spare NCDC2013 with working Nav, paired with a working GID ,  but buggered CDC   with the pass code..... 

(and a not particluarly good facia...   it likes to jump off..... unless you're careful about how you fit it..    )

if it's of any use in making it all fully functional....  you're welcome to nab it.