Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[doz]

i think your referring to the top pulley/tensioner assembly

[Webby the Bear]

i think your referring to the top pulley/tensioner assembly

Hmmm thinking about it I think you're right... I think it's the backing plate for the idlers I'm thinking of.

Sorry to confuse 

[tport]

Just changed my pattern water pump (with metal impeller) after only 12,000 miles, leaking and noisy bearings.  Changed for GM model, hopefully will last a little longer!

[jonny2112]

Why is this so cheap?

http://www.buypartsby.co.uk/timing-belts-and-kits-buy.php

[Elite_L0ver]

Why is this so cheap?

http://www.buypartsby.co.uk/timing-belts-and-kits-buy.php

There's no part number no pic and doubt it would be a waterpump for £4.40 sorry to burst the bubble 

[jonny2112]

Oooops 
Link doesn't work 
It was a timing belt kit for around £60 plus vat?

[Elite_L0ver]

Oooops 
Link doesn't work 
It was a timing belt kit for around £60 plus vat?

That would be for belt onlyy and for stuff like that I would go fir full kit which I can get for about 70-90£ on TC its the heart of the engine and cheap stuff goes quicker I personally wouldn't risk it nor stuff like that off fleebay

[aaronjb]

Oooops 
Link doesn't work 
It was a timing belt kit for around £60 plus vat?

That would be for belt onlyy and for stuff like that I would go fir full kit which I can get for about 70-90£ on TC its the heart of the engine and cheap stuff goes quicker I personally wouldn't risk it nor stuff like that off fleebay

According to the site it contains:

990: T/Belt
VSKF06646: Tens.Pulley, T/Belt
VSKF06645: Guide Pulley, T/Belt
VSKF06641: Screw/Bolt

[PAULCDX]

Recently brought a new QH water pump which included the O ring seal for £27 off ebay

Was advised that was a decent and good manufacturer so think I had a good buy 

[Elite_L0ver]

Why is this so cheap?

http://www.buypartsby.co.uk/timing-belts-and-kits-buy.php

Elite Pete does WP and cambelt kits fitted for 230ish if any good

[jonny2112]

There are a couple of very generous and worthy members who could and would do this for me. One of them still might, even at one of the meets if I can make it. As always cost is a factor and as I live in NI, I have to cross the dearest stretch of water known to man! Was maybe, just maybe, considering having a go myself.
Ultimately I'll probably end up begging one of the experts though 

[Lazydocker]

There are a couple of very generous and worthy members who could and would do this for me. One of them still might, even at one of the meets if I can make it. As always cost is a factor and as I live in NI, I have to cross the dearest stretch of water known to man! Was maybe, just maybe, considering having a go myself.
Ultimately I'll probably end up begging one of the experts though 

Not quite... The Isle of Wight ferry is the most expensive (per mile) in the country, but I know what you mean

[TheBoy]

Oooops 
Link doesn't work 
It was a timing belt kit for around £60 plus vat?

Sounds about right for a pattern cambelt kit. I use the contitech kits from buypartsby.

[TheBoy]

Oooops 
Link doesn't work 
It was a timing belt kit for around £60 plus vat?

That would be for belt onlyy and for stuff like that I would go fir full kit which I can get for about 70-90£ on TC its the heart of the engine and cheap stuff goes quicker I personally wouldn't risk it nor stuff like that off fleebay

GM V6 cambelt is about £130 on TC, thus I use quality pattern.

[jonny2112]

Oooops 
Link doesn't work 
It was a timing belt kit for around £60 plus vat?

Sounds about right for a pattern cambelt kit. I use the contitech kits from buypartsby.

That was from buypartsby but there was no manufacturer listed, I don't think.