Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please check the Forum Guidelines at the top of the Newbie section

Pages: [1]   Go Down

Author Topic: torque settings  (Read 1133 times)

0 Members and 1 Guest are viewing this topic.

Steve B

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Leicestershire
  • Posts: 3639
    • '52' MV6 3.2 Saloon
    • View Profile
torque settings
« on: 07 May 2012, 18:35:27 »
is this all correct for a 2002 2.2 petrol


Torque wrench settings...

                                                          Nm                         lbf ft

Coolant pump....................................  25                          28

Timing belt cover bolts:
    Outer cover...................................   6                            4
    Rear cover.....................................  8                            6

Timing belt idler pulley:
    Pulley bolt......................................  25                          18
    Mounting bracket bolts....................  25                          18

Timing belt tensioner bolt....................  20                         15
Logged

Mikes1670

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Hull
  • Posts: 162
    • View Profile
Re: torque settings
« Reply #1 on: 07 May 2012, 19:04:30 »
According to my Haynes manual 25Nm equates to 18 lbf ft. But other than that yes those figures are as per Haynes manual. :y
Logged

PhilRich

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • A bit further North of the Back of Beyond!
  • Posts: 10338
    • Mk 2 Volvo V70
    • View Profile
Re: torque settings
« Reply #2 on: 07 May 2012, 19:29:22 »
Save these to your PC mate, they may help for the future :y





Logged
If it ain't broke keep fixing it 'til it is!

Steve B

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Leicestershire
  • Posts: 3639
    • '52' MV6 3.2 Saloon
    • View Profile
Re: torque settings
« Reply #3 on: 07 May 2012, 21:11:20 »
Quote from: PhilRich on 07 May 2012, 19:29:22
Save these to your PC mate, they may help for the future :y







cheers thanks for that  :y
Logged

Steve B

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Leicestershire
  • Posts: 3639
    • '52' MV6 3.2 Saloon
    • View Profile
Re: torque settings
« Reply #4 on: 07 May 2012, 23:11:17 »
Quote from: bigtimecube on 07 May 2012, 18:35:27
is this all correct for a 2002 2.2 petrol


Torque wrench settings...

                                                          Nm                         lbf ft

Coolant pump....................................  25                          28

Timing belt cover bolts:
    Outer cover...................................   6                            4
    Rear cover.....................................  8                            6

Timing belt idler pulley:
    Pulley bolt......................................  25                          18
    Mounting bracket bolts....................  25                          18

Timing belt tensioner bolt....................  20                         15

i agree...readings were took from a previous post on here
Logged
Pages: [1]   Go Up
« previous next »
 

Page created in 0.014 seconds with 17 queries.