Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[tunnie]

Can the bolt and clip for this be bought alone? Along with bolts which hold tray underneath the cable by the rad?

[dbug]

Yep - Vx dealer

11047302, Screw, Oval Hd.4.8 X 16, Bonnet Cable Clamp

2878335, Clamp, Bonnet Cable To Front Panel

11070693, Nut, Clamp, Cable, Release



HTH

[Jimbob]

and see http://www.omegaowners.com/forum/index.php?topic=90677.0

[tunnie]

Cheers chaps. I have fitted a new cable already, but had to reuse old crap bolts. Also can't for life of me figure out how to release handle in the footwell. Not bolted as far as I can see, just clipped. But cannot move the bugger 

[Brikhead]

Also can't for life of me figure out how to release handle in the footwell. Not bolted as far as I can see, just clipped. But cannot move the bugger 

Very awkward to do, the first one I removed by bending the metal bracket that secures it, once it's off you can then see where to insert a butter knife to release the clip...

[tunnie]

Thanks, will take a look, its just loose at the moment. Won't get another look at it for couple of weeks, but it works if you pull the whole assembly for now

[zirk]

Ive never had to remove the Handle, unless your replacing it, on the adjuster side if using the old clip gets some amalgamating tape and tightly wrap it around the new cable (about 6 turns) where you think it needs to be and tighten the adjuster on it.