Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[scottambrose]

In.cutting off my anti roll bar link that was siezed ive cut the abs sensor lead in the loom ive solderes the wires back tigether but the abs andtc light is still on

[dbug]

Either wires not joined correctly or dry joints

[scottambrose]

Will I need to reset anything

[TheBoy]

Will I need to reset anything

no, should work when fixec

[scottambrose]

Thank god for that just my luck I cut the loom before the plug or id of just got a new sensor

[scottambrose]

help. i had to cut the plug off and then join the wires back up either side of the plugs but on the loom side there is a blue wire a brown wire and bare wire in the middle but on the sensor side its just a brown and a black wire no third wire. im stuck now. can anyone help i cant get the light to go out

[briy2]

Think the bare wire is just a shielding wire

[scottambrose]

so in that case then when ive joined the brown to the brown and the blue to the black the light should go off but it hasnt or do i need to drive it a bit

[scottambrose]

ive driven it and its still on. 

[noel]

if there is a code showing try clearing it