Topic: Panel Preservation (Read 1170 times)

waspy · « **on:** 23 September 2012, 16:49:17 »

I've recently acquired a brand new Monaro bonnet. I plan on storing it for as long as is needed (probably never).
It's in black primer, but i would like to know if i need to preserve it in any way!! It will either be used or sold on & obviously painted in the future.
I thought about Waxoil or something similar, but what I use will have to be removed for painting. Any ideas please?

I've seen panels just left in storage that have rust coming through & I would like to avoid this.

dbug · « **Reply #1 on:** 23 September 2012, 17:39:10 »

We use something lie this to preserve highly polished injection moulds http://www.ebay.co.uk/itm/Aerosol-Solutions-M-S-c-Mould-Protection-CLEAR-400ml-Aerosol-Spray-/120795783476?pt=LH_DefaultDomain_3&hash=item1c1ffd6134

razzo · « **Reply #2 on:** 23 September 2012, 17:56:07 »

couple of coats of a decent epoxy primer

waspy · « **Reply #3 on:** 23 September 2012, 19:09:47 »

Thank you both

cem_devecioglu · « **Reply #4 on:** 23 September 2012, 20:33:37 »

Quote from: razzo on 23 September 2012, 17:56:07

couple of coats of a decent epoxy primer

yep..

waxoil later will be problem for painting.. needs to be cleaned in detail.. $:-\$

cem_devecioglu · « **Reply #5 on:** 23 September 2012, 20:49:35 »

Quote from: cem on 23 September 2012, 20:33:37

Quote from: razzo on 23 September 2012, 17:56:07
couple of coats of a decent epoxy primer

yep..

waxoil later will be problem for painting.. needs to be cleaned in detail.. $:-\$

dont forget to sand before epoxy

News:

Author Topic: Panel Preservation (Read 1170 times)

waspy

Panel Preservation

dbug

Re: Panel Preservation

razzo

Re: Panel Preservation

waspy

Re: Panel Preservation

cem_devecioglu

Re: Panel Preservation

cem_devecioglu

Re: Panel Preservation