Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please check the Forum Guidelines at the top of the Newbie section

Pages: [1]   Go Down

Author Topic: breather pipe leak  (Read 715 times)

0 Members and 1 Guest are viewing this topic.

lewis1

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • cork ireland
  • Posts: 14
    • 2.2 omega
    • View Profile
breather pipe leak
« on: 31 December 2012, 21:34:51 »
hi lads  well i think its a breather pipe its about an inch thick silver and ribbed . i think its going down to the sump or the bottom of the  block, this is weeping oil can i just remove it and put a bit of sealer around it???
Logged

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 106826
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: breather pipe leak
« Reply #1 on: 01 January 2013, 10:47:55 »
Quote from: lewis1 on 31 December 2012, 21:34:51
hi lads  well i think its a breather pipe its about an inch thick silver and ribbed . i think its going down to the sump or the bottom of the  block, this is weeping oil can i just remove it and put a bit of sealer around it???
This the 90 degree one out of the cam covers, connecting to a metal tube going down the bottom of the block?

Remove the rubber bit, and clean. Is it leaking there, or at bottom of metal bit?


Probably worth doing a full throttle body clean as well...
Logged
Grumpy old man

lewis1

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • cork ireland
  • Posts: 14
    • 2.2 omega
    • View Profile
Re: breather pipe leak
« Reply #2 on: 01 January 2013, 15:17:43 »
its leaking at the bottom metal piece is there a good chance of breaking it when removing it??
Logged
Pages: [1]   Go Up
« previous next »
 

Page created in 0.019 seconds with 16 queries.