Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[doz]

I'd just like to add doing business with Cliff was completely painless. Cliff is an perfect gentleman to deal with good communication throughout. 

[Cliffo B]

It's a donut tank as per the subject title
Set horizontal in the spare wheel well
As I recall the tanks were availabee in groups sized by diameter
From the particular group that suited miggy's well diameter I simply chose the deepest one made
This turned out to be about 3" higher than the floor level
Hence  why I had to raise the floor level
I do have the makers spec certificate (Polish) with English sub- titles
The height is given as 270mm
The diameter as 650mm
Capacity  76 (would consider Ltrs but nothing Quoted)
Also it is a 4 hole spec
I understand this to be far better  than a single hole multivalve install   
The tank comes with all the necessary valves guages etc installed in the vapour box by myself
I'll try and post a pic showing the tank

 

[Cliffo B]

[Cliffo B]

[Cliffo B]

Hope these pics answer some of your queries
Please note they were taken pre tank install
No connections made or final fix
but give a good  idea of tank size

[Cliffo B]

Hi all
Now have to say the rear end kit is no longer available
Could Admins please remove S.A.P.
Especially as my attempt at pic management proved to be a disaster
Going to take further tuition next week