Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please check the Forum Guidelines at the top of the Newbie section

Pages: 1 2 [3]  All   Go Down

Author Topic: P O S self levelling suspension  (Read 3905 times)

0 Members and 1 Guest are viewing this topic.

albitz

  • Guest
Re: P O S self levelling suspension
« Reply #30 on: 30 January 2013, 13:07:21 »
Also saves all the crap falling in your eyes and restricted access etc. Depends if bumper self tappers are seized up or not maybe.
Logged

symes

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • oxford
  • Posts: 3488
  • Madness is a state of i dont mind
    • R reg 940 volvo
    • View Profile
Re: P O S self levelling suspension
« Reply #31 on: 30 January 2013, 17:51:07 »
Quote from: Albitz on 30 January 2013, 12:53:59
Location of S/L pump,with wing and bumper removed. :y


Cheers Albitz :y :y But think I found problem
The FUSE HOLDER   yes  said fuse holder=the Terminals that grip on fuse (being GM rubbish) were loose so used a tiny screwdriver to close  them up Put fuse in and now its working again- :y :y :y
Am still going to check it all saturday anyway so that I can familiarize myself to layout and operation  :y
Logged
1998 volvo 940 turbo 225bhp +1965 Rover 5000 v8+ 1962 ford consul 375 lowrider

albitz

  • Guest
Re: P O S self levelling suspension
« Reply #32 on: 30 January 2013, 18:16:40 »
Result by the sound of it. :y
Logged

adey2

  • Senior Member
  • ****
  • Offline Offline
  • Gender: Male
  • nuneaton, warwickshire
  • Posts: 598
  • if all else fails hit it with a hammer
    • 2000 3.0 elite estate lpg
    • View Profile
Re: P O S self levelling suspension
« Reply #33 on: 03 February 2013, 00:55:13 »
has anyone ever tried standard springs in rather then the softer s/l ones with the shocks still in situ, cause mine has extra weight with lpg tanks wondered b4 i went for it
Logged
v6 locking kit , code reader available, engine hoist and engine stand

also has 2.6 mv6 estate 2001, hilux surf 3.0, vectra 2.0 lpg 2000

05omegav6

  • Guest
Re: P O S self levelling suspension
« Reply #34 on: 03 February 2013, 01:13:30 »
If your thinking along those lines, then fit plod springs :y
Logged

feeutfo

  • Guest
Re: P O S self levelling suspension
« Reply #35 on: 03 February 2013, 01:31:48 »
Any springs will work with sl shocks. Mv6, standard, plod(no direct experience but plod do use them with sl), elite springs all fine. :)


Note, if you have elite self levelling springs, these must be used with self levelling shocks, or the car will drag its arris along the ground.
Logged

adey2

  • Senior Member
  • ****
  • Offline Offline
  • Gender: Male
  • nuneaton, warwickshire
  • Posts: 598
  • if all else fails hit it with a hammer
    • 2000 3.0 elite estate lpg
    • View Profile
Re: P O S self levelling suspension
« Reply #36 on: 03 February 2013, 02:00:06 »
i was planning keeping the shocks for the extra help but it is soft on ass end hence thinking fitting harder springs
Logged
v6 locking kit , code reader available, engine hoist and engine stand

also has 2.6 mv6 estate 2001, hilux surf 3.0, vectra 2.0 lpg 2000
Pages: 1 2 [3]  All   Go Up
« previous next »
 

Page created in 0.01 seconds with 17 queries.