Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[finnsepse]

So my english is not good so be patient / i try to make my question clear .
I have Tech 1 tester and Omega B 95 test cartridge and GM 16/24 Pin DLC Adapter cable (P/N 3000081) and Vehicle Interface Module (VIM-P/N 3000091) .
What i dont have Tech 1 14/26 Pin DLC cable (P/N TA01150) / i have bought both connectors / D 15 female connector and centronix 14p female connector and cable needed .
Can anyone who have this original cable tell me how to connect these connectors together .
Or if anyone have original cable to connect Tech 1 to Omega B OBD 2 connector ( without that VIM thing) i will be happy to hear how to connect D 15 connector and Obd 2 connector together to make a original cable to connect Tech 1 to Omega B .
If anyone have original cables on sale , please let me know / here in Finland those things are very unknown .
Greetings Seppo

[TheBoy]

Only Tech1 owner I can think of is Omegatoy...  ...though not sure if he owns a multimeter . Seem to recall his lead has been modified as well. Might be worth a PM?

[finnsepse]

Thanks i try pm to him .

[humbucker]

Hi, I've got a Tech1 complete with the Omega B cartridge and all the other bits you mention. Let me re-read your post to try and help...

[humbucker]

My Tech1(A) goes into the OBDII compliant interface that I have and this then plugs into the diagnostic port on the Omega. I will try and get a better pic for you tomorrow. Mine is two cables iirc;

Tech 1 > cable > interface > OBDII cable : diagnostic port

[humbucker]

Ok, this is a pic of *some* of my Tech1 gear. In the pic below you will see the Tech1 itself in the case. To the LEFT of it you will see the interface module and the OBDII cable that plugs straight into the Omega diagnostic port (already joined together in the pic). I connect the Tech1 to this using the regular/master Tech1 cable (top right). The OBDII cable is plugged directly into the diagnostic port. I hope that helps:

[humbucker]

Perhaps an even better pic to show connection:



 

[TheBoy]

Humbucker, yours looks to have the multiplexer, which most don't

That might make testing the cable harder

[finnsepse]

Ok friends it is that language barrier that makes this conversation interesting.
So ihave allmost all equipments to analyze my B Omega with Tech 1 / only thing missing  is
that cable that goes from Tech 1 to Vehicle Interface Module (VIM-P/N 3000091) other parts are
here.  And correct word can be cord or cable, iam not sure 
I have bought both couplings (hope that word is right) and cord to link them together to make that missing original cable to mentioned earlier .
So i need information , if some one look his own cable what coupling pin (in Tech side)should to link to what pin in coupling to VIM side (all them separately)so i am asking a wiring diagram to make my own cable. User manuals etc i have but there are no wiringdiagram . Vetronix dont whant
any one to make spareparts them self .
Seppo

[TheBoy]

If my understanding is right, OP needs pinout of cable from tester to the multiplexor unit - humbucker, are you able to get a meter on yours to work this out?

[humbucker]

My toolbox is lacking a multimeter I'm afraid, due to be remedied shortly so will report back when one is at hand.

[finnsepse]

Ok ill be waiting / no hurry the need for wiringdiagram is near when summer is on / my working space is outside , so in winter i do nothing with hobby Omegas 
Seppo