Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to OOF

Pages: 1 [2]  All   Go Down

Author Topic: low beam fld vision - vectra cdx  (Read 5738 times)

0 Members and 1 Guest are viewing this topic.

mcd840

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Alloa
  • Posts: 111
    • vectra cdx
    • View Profile
Re: low beam fld vision - vectra cdx
« Reply #15 on: 08 February 2013, 18:33:22 »
had the car plugged into tech 2 earlier and come back with this

B1424 - NOT PRESENT, LOW BEAM SIGNAL VOLTAGE TO LOW
B3410 - FRONT CAR LEVEL SENSOR SIGNAL VOLTAGE OUT OF RANGE

the voltage coming from the front level sensor was only 0.1 volts where the rear level sensor was showing around 2.7 volts. So we are assuming that the front level sensor is at fault.
Logged

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 107073
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: low beam fld vision - vectra cdx
« Reply #16 on: 09 February 2013, 08:36:46 »
Quote from: mcd840 on 08 February 2013, 18:33:22
had the car plugged into tech 2 earlier and come back with this

B1424 - NOT PRESENT, LOW BEAM SIGNAL VOLTAGE TO LOW
B3410 - FRONT CAR LEVEL SENSOR SIGNAL VOLTAGE OUT OF RANGE

the voltage coming from the front level sensor was only 0.1 volts where the rear level sensor was showing around 2.7 volts. So we are assuming that the front level sensor is at fault.
Was the B3410 PRESENT or NOT PRESENT?

I assume the fact you have warning, it was PRESENT, esp given the live data reading.

Check the front sensor hasn't popped off (similar setup to omega, sensor mounted to subframe, with a ball jointed rod connecting to wishbone)
Logged
Grumpy old man

mcd840

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Alloa
  • Posts: 111
    • vectra cdx
    • View Profile
Re: low beam fld vision - vectra cdx
« Reply #17 on: 09 February 2013, 10:58:50 »
Quote from: TheBoy on 09 February 2013, 08:36:46
Quote from: mcd840 on 08 February 2013, 18:33:22
had the car plugged into tech 2 earlier and come back with this

B1424 - NOT PRESENT, LOW BEAM SIGNAL VOLTAGE TO LOW
B3410 - FRONT CAR LEVEL SENSOR SIGNAL VOLTAGE OUT OF RANGE

the voltage coming from the front level sensor was only 0.1 volts where the rear level sensor was showing around 2.7 volts. So we are assuming that the front level sensor is at fault.
Was the B3410 PRESENT or NOT PRESENT?

I assume the fact you have warning, it was PRESENT, esp given the live data reading.

Check the front sensor hasn't popped off (similar setup to omega, sensor mounted to subframe, with a ball jointed rod connecting to wishbone)

cant think...it just said front car level sensor signal voltage out of range, it was only showing 0.1 volts though. I have allready checked the sensor, it was all still in one piece
« Last Edit: 09 February 2013, 11:00:24 by mcd840 »
Logged

Andy B

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Bury Lancs
  • Posts: 39789
    • ML350 TDM SmartRoadster
    • View Profile
Re: low beam fld vision - vectra cdx
« Reply #18 on: 09 February 2013, 21:39:26 »
Quote from: mcd840 on 09 February 2013, 10:58:50
..... the sensor, it was all still in one piece

So was mine when I had the same message, the sensor was goosed though. A 'new' sensor solved the problem.  :y
Logged

mcd840

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Alloa
  • Posts: 111
    • vectra cdx
    • View Profile
Re: low beam fld vision - vectra cdx
« Reply #19 on: 23 February 2013, 18:31:42 »
Hi again all, right we replaced the front wishbone sensor with a new one with fingers crossed it would solve this...Nope! Warning still on the display, got it plugged back in and the original 2 fault codes which pointed to the sensor are gone and now i have this code: B1001 - controller does not calibrate. (leftside)

anyone know what to do next?

cheers.
Logged

mcd840

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Alloa
  • Posts: 111
    • vectra cdx
    • View Profile
Re: low beam fld vision - vectra cdx
« Reply #20 on: 23 February 2013, 23:06:08 »
when any of you replaced the level sensor on your omegas did you need to have any programming done?

Logged

Jimbob

  • Global Moderator
  • *****
  • Offline Offline
  • Gender: Male
  • Chester / Flintshire
  • Posts: 24529
  • I like traffic lights, but only when they're green
    • E250 Est / Golf GTI
    • View Profile
Re: low beam fld vision - vectra cdx
« Reply #21 on: 24 February 2013, 09:01:00 »
Quote from: mcd840 on 23 February 2013, 23:06:08
when any of you replaced the level sensor on your omegas did you need to have any programming done?



No, just replace sensor and job done :y
Logged

mcd840

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Alloa
  • Posts: 111
    • vectra cdx
    • View Profile
Re: low beam fld vision - vectra cdx
« Reply #22 on: 24 February 2013, 12:46:06 »
hmmm, oh well somethings up with the leftside light now, self levelling lights, what a pain in the arse  >:(
Logged

mcd840

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Alloa
  • Posts: 111
    • vectra cdx
    • View Profile
Re: low beam fld vision - vectra cdx
« Reply #23 on: 26 February 2013, 20:10:15 »
sorted, car plugged into tech 2 and headlights re callibrated / re programmed, error message now gone.
Logged
Pages: 1 [2]  All   Go Up
« previous next »
 

Page created in 0.012 seconds with 17 queries.