Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please check the Forum Guidelines at the top of the Newbie section

Pages: [1]   Go Down

Author Topic: B pillar rattling  (Read 569 times)

0 Members and 2 Guests are viewing this topic.

Nickbat

  • Guest
B pillar rattling
« on: 17 February 2013, 21:44:37 »
When I switch on the heater fan from cold, I get a rattling coming from inside the offside B pillar. As soon as it gets warm the rattling stops.

Obviously something inside is a tad loose, but how do I get inside the B pillar to check? Never taken one apart before.  ???
Logged

dbug

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Northants
  • Posts: 14279
  • Dont knock Linux!
    • Jaguar XJ 5.0V8 Portfolio
    • View Profile
    • Dbug IT Services
Re: B pillar rattling
« Reply #1 on: 17 February 2013, 22:09:34 »
Trim usually just unclips but need to be careful removing.  Don't think there's any screws but may be wrong - have a good look first ;)
Logged
1972 Ferrari Dino, 1967 Triumph TR4A, Mondeo 2.0TDCi Estate, Jaguar XJ 5.0V8 Portfolio

05omegav6

  • Guest
Re: B pillar rattling
« Reply #2 on: 18 February 2013, 03:09:06 »
Pop the lower trim off, then two screws at the base of the upper part, also another one behind the alarm sensor.

The trim clips into/onto the headlining trims and also locates onto the belt height adjuster. If you want to remove it completely then you need to unbolt the lower belt mounting bolt :y
Logged

Nickbat

  • Guest
Re: B pillar rattling
« Reply #3 on: 18 February 2013, 20:34:28 »
Quote from: ex taxi al on 18 February 2013, 03:09:06
Pop the lower trim off, then two screws at the base of the upper part, also another one behind the alarm sensor.

The trim clips into/onto the headlining trims and also locates onto the belt height adjuster. If you want to remove it completely then you need to unbolt the lower belt mounting bolt :y

Thanks, guys!  :y
Logged
Pages: [1]   Go Up
« previous next »
 

Page created in 0.009 seconds with 18 queries.