Topic: What's this plug for? (Read 2342 times)

Murph · « **on:** 15 March 2013, 18:50:29 »

I just refitted the loom to my replacement engine and can't seem to find a home for this small plug:

It's at the back of the engine and seems to want to locate close to the CTS and temp sender, both of which are connected.

Any ideas?

Abiton · « **Reply #1 on:** 15 March 2013, 19:31:35 »

Purge valve connector I think, associated with carbon cannister.

Murph · « **Reply #2 on:** 15 March 2013, 19:37:06 »

That one's already plugged in.
Confusing eh?

Andy B · « **Reply #3 on:** 15 March 2013, 19:42:33 »

header tank low fluid level ...... $:-\$ $:-\$ $:-\$

Jimbob · « **Reply #4 on:** 15 March 2013, 19:50:27 »

Read the fault codes, may well give you a clue

Something should be open circuit.

Murph · « **Reply #5 on:** 15 March 2013, 20:16:02 »

May just do that.
Will need to get it in the car first of course.

Kevin Wood · « **Reply #6 on:** 15 March 2013, 23:43:38 »

What are the colour codings on the wires to it?

Murph · « **Reply #7 on:** 17 March 2013, 20:47:15 »

I got it.
Abiton wins the point - I mistook the part he was talking about.

Thanks all!