Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Big_Al]

Hi guys
            looking for some advice on replacing/ re sticking  the "MV6 " letters on the passenger door after they have been removed

to spray the door.

I presume new ones are unobtainable so will have to replace the originals .

What is the general method of re sticking these.?   superglue ?  double sided tape?

Has anyone been there and done this & they are still in place  a few months later ?

Any advice greatfully accepted 

[albitz]

I used contact adhesive I found in work,which has lasted well.Pita to use as it was like the stickiest of sticky bogies.

[kevinp58]

3M scotch do a tape that sticks badges and trim I used it all the time when I was in the body trade. 

[Big_Al]

I used contact adhesive I found in work,which has lasted well.Pita to use as it was like the stickiest of sticky bogies.

Nothing quite like a sticky bogie eh albs

As suggested by kevinp58  . . the 3m   proper badge tape seems to be a more likely way to do it 

[martin42]

the company who did the badges is in milton keynes,i made enquiries last year if they had any stock left of the badges for us but they had none left that we could of had 

[Big_Al]

the company who did the badges is in milton keynes,i made enquiries last year if they had any stock left of the badges for us but they had none left that we could of had 

Thanks for the reply  . . . Thought they would be unobtainable

But originals are in good nick , just gotta get 'em off

[CaptainZok]

Search for trim tape on egay. Think I got a 5 metre roll for about three quid.