Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[tunnie]

Within 30 mins of arriving he had inspected my failed 2.2 flexi, got the plasma cutter out, removed the old one. Then cleaned up the cut, spot welded replacement in, checked it. Then fully welded it up! 

He then also took a look at MotherTs 3.0 inlet manifold, no issues to report there so got some tests to run.

Listened to my 3.2, one failed lifter or sticky lifter. Suggested fully synth and sent me on my way with a set of lifters and leads!

Fantastic. Top guy 

Big, big thanks 

[Marks DTM Calib]

Not a problem, good to see you again.

That Plasma cutter sure saves some work!

[cem_devecioglu]

Not a problem, good to see you again.

That Plasma cutter sure saves some work!

sounds good.. although I dont know what it is

[tunnie]

Good to see you too 

Never seen Plasma cutter in action before, but can clearly see the benefits!

[henryd]

Not a problem, good to see you again.

That Plasma cutter sure saves some work!

sounds good.. although I dont know what it is

uses electrical arc and compressed to cut steel

[Marks DTM Calib]

Ala this cem:

http://www.youtube.com/watch?v=zgps0-Ard4c

[henryd]

Not a problem, good to see you again.

That Plasma cutter sure saves some work!

sounds good.. although I dont know what it is

uses electrical arc and compressed to cut steel

Should have been compressed air

[cem_devecioglu]

thanks
 
as I see cuts are cleaner and faster.. practical.. must get one

[cem_devecioglu]

Not a problem, good to see you again.

That Plasma cutter sure saves some work!

sounds good.. although I dont know what it is

uses electrical arc and compressed to cut steel

Should have been compressed air

I understand it thanks

[YZ250]

Nice one. 
It's this sort of assistance that makes the forum worthwhile. 

Those Plasma Cutters certainly leave a neater cut. 

[Rog]

Ala this cem:

http://www.youtube.com/watch?v=zgps0-Ard4c

Ah, ok. So it's not a weapon on the USS Enterprise

CaptainSlog: "Fired the forward plasma cutter at the Miggy invaders"

[Marks DTM Calib]

thanks
 
as I see cuts are cleaner and faster.. practical.. must get one

What it does is turn the compressed air into a super heated plasma (upto 25000 deg C!) which then cuts the steel.

The benefits are that it does not heat the steel up significanlty so distortion is minimised.

Its also very quick and controlable

[Marks DTM Calib]

Ala this cem:

http://www.youtube.com/watch?v=zgps0-Ard4c

Ah, ok. So it's not a weapon on the USS Enterprise

CaptainSlog: "Fired the forward plasma cutter at the Miggy invaders"

My ulimate tool would be a light saber, this is as close as I can get at the moment.

I think a light saber would be ace for cutting things, curring openigns in bricks, chopping bits off cars the works....the world needs light sabers.

[cem_devecioglu]

light saber.. nah.. another one
 
All I could find was the one from the star wars.. but I estimate there is no real one.. yet
 
 

[Gaffers]

Ala this cem:

http://www.youtube.com/watch?v=zgps0-Ard4c

Ah, ok. So it's not a weapon on the USS Enterprise

CaptainSlog: "Fired the forward plasma cutter at the Miggy invaders"

My ulimate tool would be a light saber, this is as close as I can get at the moment.

I think a light saber would be ace for cutting things, curring openigns in bricks, chopping bits off cars the works....the world needs light sabers.

You just have to be careful with them:

http://www.youtube.com/watch?v=5ZMmbYUi_dg