Topic: Bonnet release mechanism V6 (Read 1101 times)

robbie j · « **on:** 01 August 2013, 14:56:48 »

Some fellow OOFers may have a solution to this problem.

When pulling the bonnet release lever, the catch does not release the bonnet except if a colleague is pressing down on the front of the bonnet at the same time, when the bonnet releases fine.

I suspect it is related to the cable tension.

Has anyone any idea how to sort this out please?
$:-\$

Radar · « **Reply #1 on:** 01 August 2013, 15:23:58 »

There is a guide in the maintenance section

omega3000 · « **Reply #2 on:** 01 August 2013, 15:26:03 »

http://www.omegaowners.com/forum/index.php?topic=90615.0

robbie j · « **Reply #3 on:** 01 August 2013, 15:27:33 »

Thanks a lot!! Much appreciated.

dbdb · « **Reply #4 on:** 01 August 2013, 15:37:41 »

A common problem first though check that there is not something under the bonnet like a left tool or the wrong size battery (too high) both will cause the symptom.

dbug · « **Reply #5 on:** 01 August 2013, 16:10:47 »

Quote from: Emd on 01 August 2013, 15:26:03

http://www.omegaowners.com/forum/index.php?topic=90615.0

Usually cable needs adjusting as EMDs link

News:

Author Topic: Bonnet release mechanism V6 (Read 1101 times)

robbie j

Bonnet release mechanism V6

Radar

Re: Bonnet release mechanism V6

omega3000

Re: Bonnet release mechanism V6

robbie j

Re: Bonnet release mechanism V6

dbdb

Re: Bonnet release mechanism V6

dbug

Re: Bonnet release mechanism V6