Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Search the maintenance guides for answers to 99.999% of Omega questions

Pages: [1]   Go Down

Author Topic: Just a project idea for the future  (Read 1814 times)

0 Members and 1 Guest are viewing this topic.

dawidski

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • Angus
  • Posts: 13
    • Omega 2.2 DTI Driftcotek
    • View Profile
Just a project idea for the future
« on: 04 October 2013, 03:37:53 »

Is the bmw straight 6 lump 2.5td (the one fitted to omegas) similar in build as the petrol version if so would it be possible to fit an m3 or 328i engine in the omega using the diesel engine mounts?  :D This issue gives me sleepless nights. I would love to fit a 320hp motor in my omega.  :y
Logged
I dream of an LC

albitz

  • Guest
Re: Just a project idea for the future
« Reply #1 on: 04 October 2013, 06:31:36 »

It would be easier to fit Lotus Carlton running gear,although finding it might be the hardest part.
Logged

omega3000

  • Guest
Re: Just a project idea for the future
« Reply #2 on: 04 October 2013, 11:28:34 »

Has anyone ever put a straight 6 in an omega ? Cant recall seeing one  :-\
Logged

henryd

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • west cornwall
  • Posts: 8806
  • VW Touareg R5 tdi Auto
    • View Profile
Re: Just a project idea for the future
« Reply #3 on: 04 October 2013, 12:20:06 »

Has anyone ever put a straight 6 in an omega ? Cant recall seeing one  :-\

Vauxhall put the straight six TD lump in there so every reason to think that another straight six petrol or diesel would fit :y
Logged
other rides 
  mk3 Volvo v70 2.0 Diesel ,Citroen C2, Pug 306 cabriolet
  Sterling elite trekker pikey wagon

tunnie

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Surrey
  • Posts: 37573
    • Zafira Tourer & BMW 435i
    • View Profile
Re: Just a project idea for the future
« Reply #4 on: 04 October 2013, 12:21:56 »

Has anyone ever put a straight 6 in an omega ? Cant recall seeing one  :-\

As above, every 2.5 TD is a straight 6  :y

Also seen a Lotus 3.6 S6 in an Omega, which went in ok.

Think a 328i engine would be pointless, as would 3.0 straight 6, not much gain?
Logged

dawidski

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • Angus
  • Posts: 13
    • Omega 2.2 DTI Driftcotek
    • View Profile
Re: Just a project idea for the future
« Reply #5 on: 04 October 2013, 13:05:50 »

Has anyone ever put a straight 6 in an omega ? Cant recall seeing one  :-\

As above, every 2.5 TD is a straight 6  :y

Also seen a Lotus 3.6 S6 in an Omega, which went in ok.

Think a 328i engine would be pointless, as would 3.0 straight 6, not much gain?

The Lotus 3.6 is hard to find and would be expensive to run also its turbo so I'm guessing they are not cheap to replace.
M3 3.2 (e36 version) 320hp or (e46) 340hp I think is a good enough option. The 3.0 (in the e46) has about 245hp and I think with a little tune would run about 260, me thinks anyway  :(  So it does seem worth it. I know the omega v6 can get some serious power, but I'm not sure about reliability. 

Unless you guys can tell me if you can swap in like a 3 liter diesel from the 5 series ?  :P
Logged
I dream of an LC

dbug

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Northants
  • Posts: 14279
  • Dont knock Linux!
    • Jaguar XJ 5.0V8 Portfolio
    • View Profile
    • Dbug IT Services
Re: Just a project idea for the future
« Reply #6 on: 04 October 2013, 15:41:41 »

If I can squeeze a 3.8S Jag lump and gearbox into a 105E Ford Anglia, then anythings possible with engine swaps ;)  Having said that some transplants are easier than others, and other parts usually need upgrading like suspension, braking and drivetrain etc ;)
Logged
1972 Ferrari Dino, 1967 Triumph TR4A, Mondeo 2.0TDCi Estate, Jaguar XJ 5.0V8 Portfolio

dawidski

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • Angus
  • Posts: 13
    • Omega 2.2 DTI Driftcotek
    • View Profile
Re: Just a project idea for the future
« Reply #7 on: 04 October 2013, 15:54:55 »

Tbh if I was doing a swap I would buy a whole car so I could get all the bits needed  :y
Logged
I dream of an LC

omega3000

  • Guest
Re: Just a project idea for the future
« Reply #8 on: 04 October 2013, 18:48:19 »

Has anyone ever put a straight 6 in an omega ? Cant recall seeing one  :-\

As above, every 2.5 TD is a straight 6  :y

Also seen a Lotus 3.6 S6 in an Omega, which went in ok.

Think a 328i engine would be pointless, as would 3.0 straight 6, not much gain?


Apart from no cuts to the hands when working on a V6  ;D ;) I guess the Skyline would be a better transplant option  :y
Logged

martin42

  • Guest
Re: Just a project idea for the future
« Reply #9 on: 04 October 2013, 19:29:39 »

Hasnt there been a toyota supra engine been dropped into an omega??
Logged

Keith ABS

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Maldon Essex
  • Posts: 2931
    • View Profile
Re: Just a project idea for the future
« Reply #10 on: 04 October 2013, 20:36:35 »

  Was one dropped into a Carlton GSI a few years back
Keith B
Logged

dbug

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Northants
  • Posts: 14279
  • Dont knock Linux!
    • Jaguar XJ 5.0V8 Portfolio
    • View Profile
    • Dbug IT Services
Re: Just a project idea for the future
« Reply #11 on: 04 October 2013, 23:28:54 »

Hasnt there been a toyota supra engine been dropped into an omega??

Yep was on OOFer from Thailand IIRC ;)
Logged
1972 Ferrari Dino, 1967 Triumph TR4A, Mondeo 2.0TDCi Estate, Jaguar XJ 5.0V8 Portfolio
Pages: [1]   Go Up
 

Page created in 0.012 seconds with 17 queries.