Topic: F/L door cards (Read 1147 times)

Dan282 · « **on:** 14 November 2013, 21:43:36 »

Will the wood inserts come away from the door panel themselves?

Cheers

Dan

05omegav6 · « **Reply #1 on:** 14 November 2013, 22:01:50 »

Yup

Door card off then 10mm drill bit to dead head the relevant plastic rivets, then refit using 6mm self tappers with washers

Have a search through Gen Car Chat, posted about refurbishing door cards October 2012

zirk · « **Reply #2 on:** 14 November 2013, 23:09:39 »

Guessing it would look better if you put the self tappers on the inside of the door card when refitting though.

The Red Baron · « **Reply #3 on:** 14 November 2013, 23:12:41 »

Guessing it would look better if you put the self tappers on the inside of the door card when refitting though.

Lmao.

05omegav6 · « **Reply #4 on:** 14 November 2013, 23:22:40 »

That was the way that I fitted them, but I guess you could screw them on the other way round

people seem to do plenty worse shit to their cars

omega3000 · « **Reply #5 on:** 15 November 2013, 08:50:01 »

Guessing it would look better if you put the self tappers on the inside of the door card when refitting though.

tunnie · « **Reply #6 on:** 15 November 2013, 22:13:37 »

Albatross did a fine job a few years ago on a carbon fibre effect on F/L, it's only Interior mod I've strongly considered