Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Andy89]

Hi

Can anyone tell me if the 3,2 plenum will fit on a 3,0l engine, will the throttle body from a 3,0l fit? (I know there will be no holes to fit the throttle wire bracket)

But am I right in thinking there is no holes for either EGR or Idle air control valve? (Which will be perfect for what I have in mind)

[05omegav6]

Depends what you have in mind

[Andy89]

Well, EGR is gone and will be gone forever
And I'm also removing the Idle air control valve, as I'm installing an MBE engine management system

I won't be using the throttle cable either

[biggriffin]

3.2 plenum will fit. 3.0L throttle bodies will fit, you just need to drill and tap holes for throttle cable.

[omegod]

is the 2.6 plenum the same as 3.2?

[biggriffin]

is the 2.6 plenum the same as 3.2?

i do believe they are.

[Kevin Wood]

is the 2.6 plenum the same as 3.2?

i do believe they are.

Yep, the manifold and sandwich plate have slightly smaller passages on the 2.6 but the plenum is the same.

Sounds like an interesting project. Keep us posted.

[zirk]

is the 2.6 plenum the same as 3.2?

i do believe they are.

Yep, the manifold and sandwich plate have slightly smaller passages on the 2.6 but the plenum is the same.

Sounds like an interesting project. Keep us posted.

+1, fitted a nicely polished plenum from a 2.6, thinking that would look better on my 3.2, gave a good once over before fitting and ithey are both identical. 

[Andy89]

That's good, then I will order a 3,2l plenum
Don't think I will be using the throttle wire, as you think.
I will update the gallery thread when things start happening