Topic: biting point very high (Read 1004 times)

jay99 · « **on:** 17 December 2014, 08:09:32 »

Hello

The biting point in the omega is very high near the top and it becomes difficult to set off smoothly as I have little travel. Its a bit like on/off between having clutch and no clutch. It still works but it is causing me concern. It feels lighter than it used to be.

Clutch was changed a few months ago I think, not sure what was done. No clutch slipping.

Should I be worried

Thankssss

4x4 · « **Reply #1 on:** 17 December 2014, 08:38:19 »

Could be air in the system,if its not that,seems like clutch wasnt changed properly.

05omegav6 · « **Reply #2 on:** 17 December 2014, 09:54:23 »

Bit difficult to screw a clutch change up... could be worth getting it re bled to see if it improves matters $:-\$

Marks DTM Calib · « **Reply #3 on:** 17 December 2014, 12:41:17 »

If it was air I would expect the clutch to be lower (as you have to press the pedal further to compress the trapped air).

terry paget · « **Reply #4 on:** 17 December 2014, 14:12:25 »

On my ex-police 3.2 manual the clutch biting point was very high, I could never understand why. Eventually it began to slip, so I changed the friction plate, pressure plate, and nothing else. Since then it has behaved normally, engaging in the first 3 or 4 inches. like all my other Omegas. I cannot explain it, I merely report it.

News:

Author Topic: biting point very high (Read 1004 times)

jay99

biting point very high

4x4

Re: biting point very high

05omegav6

Re: biting point very high

Marks DTM Calib

Re: biting point very high

terry paget

Re: biting point very high