Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to OOF

Pages: [1]   Go Down

Author Topic: V6 oil pipe modification to fit external oil cooler.  (Read 2445 times)

0 Members and 1 Guest are viewing this topic.

mantaray

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Male
  • Coventry
  • Posts: 288
    • View Profile
V6 oil pipe modification to fit external oil cooler.
« on: 10 January 2015, 23:08:59 »
Been playing with my V6 engine today. Now its all clean and newly painted I have been looking at how to route the oil pipes in order to do away with the factory oil cooler and fit an external one.

Quite pleased with how its comeing along.

Logged
2.6 CDX Auto Estate,
71 Opel Manta A Series 2.5 V6

Andy B

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Bury Lancs
  • Posts: 39886
    • ML350 TDM SmartRoadster
    • View Profile
Re: V6 oil pipe modification to fit external oil cooler.
« Reply #1 on: 10 January 2015, 23:28:16 »
Quote from: mantaray on 10 January 2015, 23:08:59
... the factory oil cooler and  .....

but technically it's a heat exchanger. When the engine is cold, the oil is going to get hot first and transfer its heat to the coolant to help the engine to get to temp faster.  ;)
Logged

mantaray

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Male
  • Coventry
  • Posts: 288
    • View Profile
Re: V6 oil pipe modification to fit external oil cooler.
« Reply #2 on: 10 January 2015, 23:41:00 »
Yes you are correct, but in my case as the engine is going into my Manta A series, with a modified water system,I don't have any problems with water temp. and can therefore do away with the heat exchanger. It is just that I have had the exchanger fail before and it's not nice. also know of others that have failed, so I'd rather remove the problem so I don't have to worry. :)
Logged
2.6 CDX Auto Estate,
71 Opel Manta A Series 2.5 V6

andyc

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • Norfolk
  • Posts: 1273
    • View Profile
Re: V6 oil pipe modification to fit external oil cooler.
« Reply #3 on: 10 January 2015, 23:48:05 »
Looks good Chris, are you going to run them onto braided pipes to the cooler or have rubber ones crimped up like and OE set up?

Andy
Logged
Iceni Automotive. Classic Vauxhall/Opel Specialist. Service, Repairs, Restoration
Thetford. Norfolk

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 107521
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: V6 oil pipe modification to fit external oil cooler.
« Reply #4 on: 11 January 2015, 17:37:03 »
Without getting into pros and cons of moving it, the reason they fail is poor servicing.  Hence mine is still good after 16yrs, 219k miles ;)
Logged
Grumpy old man

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 107521
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: V6 oil pipe modification to fit external oil cooler.
« Reply #5 on: 11 January 2015, 17:37:19 »
Quote from: TheBoy on 11 January 2015, 17:37:03
Without getting into pros and cons of moving it, the reason they fail is poor servicing.  Hence mine is still good after 16yrs, 219k miles ;)
Even if the HG has failed twice!
Logged
Grumpy old man

omega3000

  • Guest
Re: V6 oil pipe modification to fit external oil cooler.
« Reply #6 on: 11 January 2015, 19:04:22 »
Quote from: TheBoy on 11 January 2015, 17:37:19
Quote from: TheBoy on 11 January 2015, 17:37:03
Without getting into pros and cons of moving it, the reason they fail is poor servicing.  Hence mine is still good after 16yrs, 219k miles ;)
Even if the HG has failed twice!

Same side  :-\
Logged

elvin315

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Male
  • Catskill, New York, USA
  • Posts: 284
  • Catera...Cadillac's unloved stepchild.
    • View Profile
Re: V6 oil pipe modification to fit external oil cooler.
« Reply #7 on: 13 January 2015, 02:19:10 »
Quote from: Andy B on 10 January 2015, 23:28:16
Quote from: mantaray on 10 January 2015, 23:08:59
... the factory oil cooler and  .....

but technically it's a heat exchanger. When the engine is cold, the oil is going to get hot first and transfer its heat to the coolant to help the engine to get to temp faster.  ;)

i thought it worked the other way around (water heated the oil). Oh well, wrong again.
Logged
Is that all there is, is that all there is
If that's all there is my friends, then let's keep dancing
Let's break out the booze and have a ball, If that's all there is

05omegav6

  • Guest
Re: V6 oil pipe modification to fit external oil cooler.
« Reply #8 on: 13 January 2015, 06:50:37 »
Quote from: elvin315 on 13 January 2015, 02:19:10
Quote from: Andy B on 10 January 2015, 23:28:16
Quote from: mantaray on 10 January 2015, 23:08:59
... the factory oil cooler and  .....

but technically it's a heat exchanger. When the engine is cold, the oil is going to get hot first and transfer its heat to the coolant to help the engine to get to temp faster.  ;)

i thought it worked the other way around (water heated the oil). Oh well, wrong again.
It works both ways... the coolant also regulates the oil temp when hot :y
Logged

4x4

  • Guest
Re: V6 oil pipe modification to fit external oil cooler.
« Reply #9 on: 13 January 2015, 21:25:16 »
Looking at the pic,it looks like the pipe is in the way of the crank sensor,  :-[
Logged
Pages: [1]   Go Up
« previous next »
 

Page created in 0.021 seconds with 17 queries.