Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please play nicely.  No one wants to listen/read a keyboard warriors rants....

Pages: [1] 2  All   Go Down

Author Topic: Geometry Setup at WIM franchise  (Read 3126 times)

0 Members and 2 Guests are viewing this topic.

steve6367

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • Posts: 1613
    • View Profile
Geometry Setup at WIM franchise
« on: 25 January 2015, 21:43:27 »
Suggested setup:

Front:
Camber: -1deg 40' both sides
Caster: 5deg both sides
Toe: 0deg 10'

Rear:
Camber -1deg 50'
Toe: 0deg 25'


I think from reading on here these are the VX values and I should ask for less Camber on the front, -1deg 10'? I have sent a PM to WIM but as the work is being done in the morning thought I'd ask the panel.

Many thanks

Steve

PS it really can't be any worse than it was!
« Last Edit: 25 January 2015, 21:51:42 by steve6367 »
Logged
2.2 CDX Estate (broken), 2.5 CD Salon, 2.5 CD Estate LPG

05omegav6

  • Guest
Re: Geometry Setup at WIM franchise
« Reply #1 on: 25 January 2015, 21:48:37 »
Miles out :o
Logged

steve6367

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • Posts: 1613
    • View Profile
Re: Geometry Setup at WIM franchise
« Reply #2 on: 25 January 2015, 21:51:16 »
All of it?

Logged
2.2 CDX Estate (broken), 2.5 CD Salon, 2.5 CD Estate LPG

05omegav6

  • Guest
Re: Geometry Setup at WIM franchise
« Reply #3 on: 25 January 2015, 21:52:39 »
Logged

steve6367

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • Posts: 1613
    • View Profile
Re: Geometry Setup at WIM franchise
« Reply #4 on: 25 January 2015, 22:00:32 »
Thanks - I'll see if we can go for those values in the morning then  :y

Logged
2.2 CDX Estate (broken), 2.5 CD Salon, 2.5 CD Estate LPG

steve6367

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • Posts: 1613
    • View Profile
Re: Geometry Setup at WIM franchise
« Reply #5 on: 25 January 2015, 22:08:19 »
Assume the toe value is 'total toe' of 0deg 05'?
Logged
2.2 CDX Estate (broken), 2.5 CD Salon, 2.5 CD Estate LPG

05omegav6

  • Guest
Re: Geometry Setup at WIM franchise
« Reply #6 on: 25 January 2015, 22:25:51 »
Both front and rear toe should toe in, and camber is negative, not positive.

Rear settings are a compromise as camber and toe are one adjustment, but thrust angle MUST be 0 :y
Logged

steve6367

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • Posts: 1613
    • View Profile
Re: Geometry Setup at WIM franchise
« Reply #7 on: 25 January 2015, 22:31:49 »
Quote from: Taxi Al on 25 January 2015, 22:25:51
Both front and rear toe should toe in
, and camber is negative, not positive.

Rear settings are a compromise as camber and toe are one adjustment, but thrust angle MUST be 0 :y

so 0deg 5' toe in each side or total?

(I'm probably bring thick, sorry!)
Logged
2.2 CDX Estate (broken), 2.5 CD Salon, 2.5 CD Estate LPG

05omegav6

  • Guest
Re: Geometry Setup at WIM franchise
« Reply #8 on: 25 January 2015, 23:24:34 »
In total :y
Logged

steve6367

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • Posts: 1613
    • View Profile
Re: Geometry Setup at WIM franchise
« Reply #9 on: 26 January 2015, 09:35:03 »
This mornings news is that WIM don't work with any other garages anymore, that website info is out of date.  :-\
Logged
2.2 CDX Estate (broken), 2.5 CD Salon, 2.5 CD Estate LPG

Terbs

  • Omega Lord
  • *****
  • Offline Offline
  • Brackley/Wareham
  • Posts: 5748
  • The Freezer Geezer
    • CD Saloon 2003
    • View Profile
Re: Geometry Setup at WIM franchise
« Reply #10 on: 26 January 2015, 09:42:11 »
Just gonna phone them and book mine in....just had new 'bones' on the 2.5 estate :y
Logged
Wrong Switch Tony......flicking the wrong bit for 50 years

Terbs

  • Omega Lord
  • *****
  • Offline Offline
  • Brackley/Wareham
  • Posts: 5748
  • The Freezer Geezer
    • CD Saloon 2003
    • View Profile
Re: Geometry Setup at WIM franchise
« Reply #11 on: 26 January 2015, 10:00:12 »
Can't be too busy at WIM...offered me 1pm, 2pm or 3pm today. Took the 1pm appointment :y
Logged
Wrong Switch Tony......flicking the wrong bit for 50 years

steve6367

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • Posts: 1613
    • View Profile
Re: Geometry Setup at WIM franchise
« Reply #12 on: 26 January 2015, 10:14:22 »
They were very helpful when I spoke to them this morning, but unforutantly for me they did advise the website is wrong and they no longer work with other garages. Offered to take a look at the print out when its done locally though, so will see what they think  :y
Logged
2.2 CDX Estate (broken), 2.5 CD Salon, 2.5 CD Estate LPG

Terbs

  • Omega Lord
  • *****
  • Offline Offline
  • Brackley/Wareham
  • Posts: 5748
  • The Freezer Geezer
    • CD Saloon 2003
    • View Profile
Re: Geometry Setup at WIM franchise
« Reply #13 on: 26 January 2015, 14:59:35 »
Just got back from WIM. They remembered you, Steve. And I confirm, they do not now work with other garages :y

Our Omega price still remains at £72 inc vat :y
Logged
Wrong Switch Tony......flicking the wrong bit for 50 years

Weds

  • Senior Member
  • ****
  • Offline Offline
  • Gender: Male
  • Chatham, Kent
  • Posts: 653
  • My other hobby
    • Mercedes E class 350 CDi
    • View Profile
Re: Geometry Setup at WIM franchise
« Reply #14 on: 26 January 2015, 17:22:47 »
Had mine done at WIM last tuesday, camber and toe well out after wishbone change. Now tracking lovely..
Logged
Pages: [1] 2  All   Go Up
« previous next »
 

Page created in 0.013 seconds with 17 queries.