Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Search the maintenance guides for answers to 99.999% of Omega questions

Pages: [1]   Go Down

Author Topic: Engine started then stopped, this may help others with similar problem.  (Read 697 times)

0 Members and 1 Guest are viewing this topic.

engineerkeith

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • Andover, Hampshire
  • Posts: 7
    • omega
    • View Profile
Engine started then stopped, this may help others with similar problem.
« on: 04 March 2015, 09:00:05 »
Advice from members gave crank sensor, fuel pump and relay as probable cause.  It was found the followers had "hydraulic locked".  The engine was eventually started by flooring the acc. pedal and motoring it over.  This cut the fuel off which did not flood the engine and allowed the oil to dissipate from the tappets.  No further problems, hope it helps someone.
Logged

Marks DTM Calib

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • West Bridgford
  • Posts: 33982
  • Git!
    • View Profile
Re: Engine started then stopped, this may help others with similar problem.
« Reply #1 on: 04 March 2015, 09:23:03 »
What work had been done?

The lifter design is such that it cant pump up unless there is a high pressure oil feed and the lifter is in the upper position of its machined bore.
Logged
Pages: [1]   Go Up
« previous next »
 

Page created in 0.015 seconds with 16 queries.