Topic: rattle on start up (Read 1108 times)

Dan282 · « **on:** 04 March 2015, 21:43:16 »

Only for a few minutes I have a rattle coming from the cam belt or aux belt area. It goes after a few minutes and only happens on start up when cold. Cam belt up to date. What could it be guys?

Sir Tigger KC · « **Reply #1 on:** 04 March 2015, 22:16:54 »

Aux belt tensioner? $:-\$

Vamps · « **Reply #2 on:** 04 March 2015, 22:26:09 »

Hydraulic Valves?

05omegav6 · « **Reply #3 on:** 04 March 2015, 22:34:48 »

Pop the aux belt off and run the engine from cold... no more than thirty seconds, and idle only.

If the noise is still there then probably lifters as Vamps says,

Otherwise if no noise, belt still off, spin each pulley in turn, checking for roughness or play

Sir Tigger KC · « **Reply #4 on:** 04 March 2015, 23:04:18 »

Hmmm lifters is more of a clatter than a rattle... $:-\$

05omegav6 · « **Reply #5 on:** 04 March 2015, 23:07:41 »

Quote from: Sir Tigger on 04 March 2015, 23:04:18

Hmmm lifters is more of a clatter than a rattle... $:-\$

Must admit waterpump was my first thought $:-\$

chrisgixer · « **Reply #6 on:** 04 March 2015, 23:32:33 »

Releasing tension off the belt will allow checking each pulley by hand.

But aux belts often do make a sqeaky rattle/typical belt noise from cold. Silicon spray on the belt will shut it up if so. And discount anything serious in the process. ...or not, as the case may be.

News:

Author Topic: rattle on start up (Read 1108 times)

Dan282

rattle on start up

Sir Tigger KC

Re: rattle on start up

Vamps

Re: rattle on start up

05omegav6

Re: rattle on start up

Sir Tigger KC

Re: rattle on start up

05omegav6

Re: rattle on start up

chrisgixer

Re: rattle on start up