Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please check the Forum Guidelines at the top of the Newbie section

Pages: 1 [2]  All   Go Down

Author Topic: Engine cutting out & fault codes  (Read 5074 times)

0 Members and 1 Guest are viewing this topic.

MikeDundee

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • Costa Del Peckham
  • Posts: 9370
    • View Profile
Re: Engine cutting out & fault codes
« Reply #15 on: 14 June 2015, 09:20:32 »
Quote from: TheBoy on 14 June 2015, 09:07:44
(Probably for DLK's benefit)

The MAF should show up at idle if its at fault. At idle, a 2.6 should be around 13kg/hr.  Generally reads low when they start to fail.


Put on a fault code on (unplug something), then clear the fault codes, which will reset trims. Then monitor Long Term Fuel Trims (LTFT) for each bank, and see if they drift from 0%. If they both drift together, and MAF is misreading, be suspicious of the MAF...  ...but rule out airleaks in intake first.

HTH :y

Cheers :y
Logged

MikeDundee

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • Costa Del Peckham
  • Posts: 9370
    • View Profile
Re: Engine cutting out & fault codes
« Reply #16 on: 16 June 2015, 06:33:57 »
Well kept an eye on the RPM's yesterday slightly lower than normal on tick over, cut out 3 times yesterday whilst driving around, and 2 times whilst in car park, revs are just dropping out when cuts out.
Logged

MikeDundee

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • Costa Del Peckham
  • Posts: 9370
    • View Profile
Re: Engine cutting out & fault codes
« Reply #17 on: 22 June 2015, 06:11:31 »
Confirmed MAF at fault, unfortunately, DLK brought a MAF but wrong one 4 pin and not 5, so have ordered one :y, for now have left the MAF unplugged, new one should be here by tomorrow, so no major hardship. Thanks to DLK for his help yesterday in sorting the problem out and confirming :y
Logged

MikeDundee

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • Costa Del Peckham
  • Posts: 9370
    • View Profile
Re: Engine cutting out & fault codes
« Reply #18 on: 23 June 2015, 20:01:48 »
New MAF arrived, today, just changed over and all appears fine now, just need the EML reset, Big thanks to Jamie as he has said on a pm he will pop down to sunny Costa Peckham tomorrow to reset :yi
Logged

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 107660
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: Engine cutting out & fault codes
« Reply #19 on: 24 June 2015, 14:15:08 »
Quote from: MikeDundee on 23 June 2015, 20:01:48
New MAF arrived, today, just changed over and all appears fine now, just need the EML reset, Big thanks to Jamie as he has said on a pm he will pop down to sunny Costa Peckham tomorrow to reset :yi
Have a bloody job, seeing as I'm the other side of the Channel ;D

EML should go out when fault is fixed...
Logged
Grumpy old man

Marks DTM Calib

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • West Bridgford
  • Posts: 34112
  • Git!
    • View Profile
Re: Engine cutting out & fault codes
« Reply #20 on: 24 June 2015, 15:26:55 »
Might take a while for the fuel trims to recover though  :y
Logged

MikeDundee

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • Costa Del Peckham
  • Posts: 9370
    • View Profile
Re: Engine cutting out & fault codes
« Reply #21 on: 01 July 2015, 05:56:47 »
EML went out the day after, all good now :y
Logged
Pages: 1 [2]  All   Go Up
« previous next »
 

Page created in 0.012 seconds with 16 queries.