Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to OOF

Pages: [1]   Go Down

Author Topic: Engine looses power and stops  (Read 1430 times)

0 Members and 1 Guest are viewing this topic.

fcc-pt

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Male
  • Portugal
  • Posts: 277
    • Omega B Caravan MV6 3.0
    • View Profile
Engine looses power and stops
« on: 02 September 2015, 23:29:28 »
Engine looses power and stops rev after reverse engaged, or after running while breaking.
But on idle everything works OK. What might be? Transmission is automatic...
« Last Edit: 02 September 2015, 23:39:18 by fcc-pt »
Logged

fcc-pt

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Male
  • Portugal
  • Posts: 277
    • Omega B Caravan MV6 3.0
    • View Profile
Re: Engine looses power and stops
« Reply #1 on: 03 September 2015, 15:37:14 »
Ok so I've readed the ecu and the errors are:

12 - ok, done it with engine off
19 - Incorrect RPM Signal
57 - Idle Air Control Voltage Low

What do you think?
I'm kind of lost here...
Logged

Lazydocker

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Woodbridge, Suffolk
  • Posts: 18848
  • Constantly Bullied by a certain Admin
    • View Profile
Re: Engine looses power and stops
« Reply #2 on: 03 September 2015, 18:16:51 »
Code 19 is crank sensor.
57 refers to Idle Air Control Valve
Logged
Whatever it is... I didn't do it

Gaffers

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • NE Hampshire/Surrey
  • Posts: 11322
    • Ford Ranger Wildtrak
    • View Profile
Re: Engine looses power and stops
« Reply #3 on: 03 September 2015, 19:05:24 »
Check the plug is fully home and connected, if it is then suspect the iacv is fooked or dirty or clean or replace as necessary
Logged

fcc-pt

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Male
  • Portugal
  • Posts: 277
    • Omega B Caravan MV6 3.0
    • View Profile
Re: Engine looses power and stops
« Reply #4 on: 03 September 2015, 21:28:27 »
Quote from: Monsieur Guffer on 03 September 2015, 19:05:24
Check the plug is fully home and connected, if it is then suspect the iacv is fooked or dirty or clean or replace as necessary

I have cleaned the iacv with wd40 loads of it... assembled but small improvements!
I've taken the inlet manifold to access the back of the engine. I wonder if the wrong torque can lead to some kind of air leak ...
Logged

fcc-pt

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Male
  • Portugal
  • Posts: 277
    • Omega B Caravan MV6 3.0
    • View Profile
Re: Engine looses power and stops
« Reply #5 on: 03 September 2015, 21:46:40 »
Perhaps the inlet o-rings are not so great but I doubt...
Logged
Pages: [1]   Go Up
« previous next »
 

Page created in 0.018 seconds with 17 queries.