Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Search the maintenance guides for answers to 99.999% of Omega questions

Pages: [1]   Go Down

Author Topic: Sthil TS400 Disc Cutter problem  (Read 867 times)

0 Members and 1 Guest are viewing this topic.

RobG

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Bristol
  • Posts: 13831
  • I might have a link, pic or part number for that
    • 16 plate Mokka. Vivaro
    • View Profile
Sthil TS400 Disc Cutter problem
« on: 01 November 2015, 09:57:35 »
No spark initially, so full service incl. all filters. new plug, new LT cable, new coil, new HT lead. Plenty of compression & fuel. Still no spark, any ideas :-\ :-\
Logged
All that is necessary for the triumph of evil is that good men do nothing.

UPVC windows/doors/fascias/soffit/gutters supplied/fitted

Rods2

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • Sandhurst Berkshire
  • Posts: 7604
    • 1999 3.0 Elite Estate
    • View Profile
Re: Sthil TS400 Disc Cutter problem
« Reply #1 on: 01 November 2015, 12:44:58 »
Check the on/off switch with a multimeter. One is open circuit, the other closed to the chassis. If all okay, check the carb diaphragm as they split!
« Last Edit: 01 November 2015, 12:47:13 by Rods2 »
Logged
US Fracking and Saudi Arabia defending its market share = The good news of an oil glut, lower and lower prices for us and squeaky bum time for Putin!

Marks DTM Calib

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • West Bridgford
  • Posts: 34010
  • Git!
    • View Profile
Re: Sthil TS400 Disc Cutter problem
« Reply #2 on: 01 November 2015, 18:35:58 »
Checm the timing as I have seen one where the woodruff key sheared. Also make sure the coil to flywheel gap is correct (a piece of paper is a good gapping method)
Logged
Pages: [1]   Go Up
« previous next »
 

Page created in 0.009 seconds with 16 queries.