Topic: 56 plate clit 1.2 clutch (Read 1404 times)

tigers_gonads · « **on:** 02 February 2016, 16:02:01 »

What are these like to change ?

Any awkward bits ?

Special tools needed ?

Can it be done off your back (at the roadside) ?

TIA

serek · « **Reply #1 on:** 02 February 2016, 22:12:48 »

send me reg nr will check for you in morning how long should take
think there is subframe to drop

lee4206 · « **Reply #2 on:** 02 February 2016, 22:25:04 »

I was asked to do one of these recently but book time of 7 hours and most of the front end off whilst doing it on the driveway put me off. There's probably a quicker easier way but I didn't fancy the risk.
Good luck if you decide to do it.
Lee

henryd · « **Reply #3 on:** 03 February 2016, 00:22:03 »

Quote from: serek on 02 February 2016, 22:12:48

send me reg nr will check for you in morning how long should take
think there is subframe to drop

Yep subframe out or at least lowered a lot on passenger side,you gotta undo it to drop it so may as well lose it,gearbox is easy then

Marks DTM Calib · « **Reply #4 on:** 03 February 2016, 04:01:59 »

SAC unit to aren't they?

You can get round this by tightening the pressure plate bolts half a turn at a time to clamp it up evenly, alternative is a pricey tool

tigers_gonads · « **Reply #5 on:** 03 February 2016, 10:06:07 »

Not a job for a 50 year old fat bastard lying in the gutter on a nice cold February day then

He has been quoted 285 all in from a clutch specialist down the road $:-\$
I'll pass all that on to him.

Cheers Lads

News:

Author Topic: 56 plate clit 1.2 clutch (Read 1404 times)

tigers_gonads

56 plate clit 1.2 clutch

serek

Re: 56 plate clit 1.2 clutch

lee4206

Re: 56 plate clit 1.2 clutch

henryd

Re: 56 plate clit 1.2 clutch

Marks DTM Calib

Re: 56 plate clit 1.2 clutch

tigers_gonads

Re: 56 plate clit 1.2 clutch