Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to OOF

Pages: 1 2 [3] 4  All   Go Down

Author Topic: Project GNU  (Read 3842 times)

0 Members and 1 Guest are viewing this topic.

HNO3GOH

  • Senior Member
  • ****
  • Offline Offline
  • Gender: Male
  • Somerset
  • Posts: 988
  • Play time.
    • View Profile
Re: Project GNU
« Reply #30 on: 18 July 2008, 20:23:36 »
Quote
Quote
Quote
Quote
Quote
Lol, sorry, I had a falling out with the original person who worked on it due to his corner cutting and bloody mindedness through not listening and heeding the advice when working on this one.
So now the cat's coming out of the bag!!




don't tell me this was over the exhaust manifold gaskets  ::)

It was over the:

Fitting an unknown cheap nasty early engine
Non-gen cam cover seals
Not bothering with the manifold gaskets
Badly fitting the gearbox so as to destroy (as was found out later) the torque converter because the advice of fitting it to the box first was not heeded.

Then posting that there crap which was totally due to an incompitent worker who didn't practice what he preached!

The bodges I witnessed on some of the cars he bought was shocking and I could take no more!


I remember this car - and I remember the person doing it! :-?

Well when there is a meet down this way you should come and have a look as its much better now  :)
Logged
Garage clear out in March 2011 and I will have a large amount of omega parts going very cheap.

HolyCount

  • Guest
Re: Project GNU
« Reply #31 on: 18 July 2008, 20:25:13 »
Seems like a lot of people know far more about it than me -- I think HN03 and I have discovered all of it's gremlins ------- unless anybody knows different  :-?

(When I say "HN03 and I discovered all" ... HE discovered -- I watched helplessly  ::) )
Logged

HolyCount

  • Guest
Re: Project GNU
« Reply #32 on: 18 July 2008, 20:26:38 »
Quote
The engine in that car wasn't the original hence the whole front end of the gas system had to be replumbed and wired when the engine was swapped. Just a pity the standard wasn't very good but then it matches the rest of the sad engine swap (well two engine swaps actually) story.......

Two ?
Logged

Martin_1962

  • Guest
Re: Project GNU
« Reply #33 on: 18 July 2008, 20:33:26 »
Quote
Quote
Quote
Quote
Quote
Quote
Lol, sorry, I had a falling out with the original person who worked on it due to his corner cutting and bloody mindedness through not listening and heeding the advice when working on this one.
So now the cat's coming out of the bag!!




don't tell me this was over the exhaust manifold gaskets  ::)

It was over the:

Fitting an unknown cheap nasty early engine
Non-gen cam cover seals
Not bothering with the manifold gaskets
Badly fitting the gearbox so as to destroy (as was found out later) the torque converter because the advice of fitting it to the box first was not heeded.

Then posting that there crap which was totally due to an incompitent worker who didn't practice what he preached!

The bodges I witnessed on some of the cars he bought was shocking and I could take no more!


I remember this car - and I remember the person doing it! :-?

Well when there is a meet down this way you should come and have a look as its much better now  :)


Get to Newent - I will be visiting for an afternoon
Logged

HolyCount

  • Guest
Re: Project GNU
« Reply #34 on: 18 July 2008, 20:48:18 »
Can I ask ( dare I ask) who was the previous owner ??
Logged

tunnie

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Surrey
  • Posts: 37625
    • Zafira Tourer & BMW 435i
    • View Profile
Re: Project GNU
« Reply #35 on: 18 July 2008, 20:57:41 »
Quote
Can I ask ( dare I ask) who was the previous owner ??

2 members here, me, and someone previous who has left.

I sold it to a guy who picked it up on a trailer... like to add when i sold the car, it went with Elite alloys, not CDX which it has now.

I lacked experiance to fix it right, it did need a new engine.

Unfortunetly i picked it up from the guy who MarkDTM had a fall out with...

I was not impressed with his work, incorrectly fitted torque converter, feked the gearbox. Exhaust manifold nuts..... there were 3 differnt sizes!

I lacked experiance, and eventually time...
« Last Edit: 18 July 2008, 20:58:24 by tunnie »
Logged

Vamps

  • Offline Offline
  • Gender: Male
  • Bishop Middleham, Co Durham.
  • Posts: 24708
  • Flying Tonight, so Be Prepared.
    • Mig 2.6CDX and 2.2 Honda
    • View Profile
Re: Project GNU
« Reply #36 on: 18 July 2008, 20:59:00 »
Quote
Can I ask ( dare I ask) who was the previous owner ??

Whispering........ I wanted to know that too, just in case I have got the wrong idea you uderstand. ;) ;)
Logged

Vamps

  • Offline Offline
  • Gender: Male
  • Bishop Middleham, Co Durham.
  • Posts: 24708
  • Flying Tonight, so Be Prepared.
    • Mig 2.6CDX and 2.2 Honda
    • View Profile
Re: Project GNU
« Reply #37 on: 18 July 2008, 21:00:29 »
Quote
Quote
Can I ask ( dare I ask) who was the previous owner ??

Whispering........ I wanted to know that too, just in case I have got the wrong idea you uderstand. ;) ;)

so not tunnie then....... ;D
Logged

Jimbob

  • Global Moderator
  • *****
  • Offline Offline
  • Gender: Male
  • Chester / Flintshire
  • Posts: 24540
  • I like traffic lights, but only when they're green
    • E250 Est / Golf GTI
    • View Profile
Re: Project GNU
« Reply #38 on: 18 July 2008, 21:07:49 »
2 words - dancing chicken!
Logged

Golfbuddy

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Cornwall
  • Posts: 4151
  • I'm On An Economy Drive
    • View Profile
Re: Project GNU
« Reply #39 on: 18 July 2008, 21:08:50 »
Red curly wig.  ::)
Logged
[size=24]        [/size][/b]

HolyCount

  • Guest
Re: Project GNU
« Reply #40 on: 18 July 2008, 21:18:28 »
Quote
Quote
Can I ask ( dare I ask) who was the previous owner ??

2 members here, me, and someone previous who has left.

I sold it to a guy who picked it up on a trailer... like to add when i sold the car, it went with Elite alloys, not CDX which it has now.

I lacked experiance to fix it right, it did need a new engine.

Unfortunetly i picked it up from the guy who MarkDTM had a fall out with...

I was not impressed with his work, incorrectly fitted torque converter, feked the gearbox. Exhaust manifold nuts..... there were 3 differnt sizes!

I lacked experiance, and eventually time...

Tunnie -- the guy who picked it up from you is my son in law. Wheels have been changed a couple of times since ( can't decide which I prefer!!).

I bought it fully aware it was a project car in need of major work -- it was in no way mis-represented and I have no complaints there.

All the dodgy stuff has been replaced with GM and, fingers crossed, she should be running unaided next week!

I would like to make it clear to anyone reading all this that there is no fault with Mark, James or Tunnie here and I am grateful for their help and advice in getting poor old GNU back where she belongs.
Logged

tunnie

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Surrey
  • Posts: 37625
    • Zafira Tourer & BMW 435i
    • View Profile
Re: Project GNU
« Reply #41 on: 18 July 2008, 21:36:39 »
Quote
Quote
Quote
Can I ask ( dare I ask) who was the previous owner ??

2 members here, me, and someone previous who has left.

I sold it to a guy who picked it up on a trailer... like to add when i sold the car, it went with Elite alloys, not CDX which it has now.

I lacked experiance to fix it right, it did need a new engine.

Unfortunetly i picked it up from the guy who MarkDTM had a fall out with...

I was not impressed with his work, incorrectly fitted torque converter, feked the gearbox. Exhaust manifold nuts..... there were 3 differnt sizes!

I lacked experiance, and eventually time...

Tunnie -- the guy who picked it up from you is my son in law. Wheels have been changed a couple of times since ( can't decide which I prefer!!).

I bought it fully aware it was a project car in need of major work -- it was in no way mis-represented and I have no complaints there.

All the dodgy stuff has been replaced with GM and, fingers crossed, she should be running unaided next week!

I would like to make it clear to anyone reading all this that there is no fault with Mark, James or Tunnie here and I am grateful for their help and advice in getting poor old GNU back where she belongs.

Glad to see its getting the time, effort and resources it needed  :y
Logged

Taxi_Driver

  • Guest
Re: Project GNU
« Reply #42 on: 18 July 2008, 21:48:28 »
Quote
Quote
Quote
Quote
Lol, sorry, I had a falling out with the original person who worked on it due to his corner cutting and bloody mindedness through not listening and heeding the advice when working on this one.
So now the cat's coming out of the bag!!




don't tell me this was over the exhaust manifold gaskets  ::)

It was over the:

Fitting an unknown cheap nasty early engine
Non-gen cam cover seals
Not bothering with the manifold gaskets
Badly fitting the gearbox so as to destroy (as was found out later) the torque converter because the advice of fitting it to the box first was not heeded.

Then posting that there crap which was totally due to an incompitent worker who didn't practice what he preached!

The bodges I witnessed on some of the cars he bought was shocking and I could take no more!

So are you hinting Mark.......that you werent too impressed with his standard of work? :-/ ;D
Logged

Martin_1962

  • Guest
Re: Project GNU
« Reply #43 on: 18 July 2008, 21:56:59 »
Quote
Tunnie -- the guy who picked it up from you is my son in law. Wheels have been changed a couple of times since ( can't decide which I prefer!!).

Your son in law is Alan Tracey :y
Logged

HolyCount

  • Guest
Re: Project GNU
« Reply #44 on: 18 July 2008, 23:08:00 »
Quote
Quote
Tunnie -- the guy who picked it up from you is my son in law. Wheels have been changed a couple of times since ( can't decide which I prefer!!).

Your son in law is Alan Tracey :y

 ;D
Logged
Pages: 1 2 [3] 4  All   Go Up
« previous next »
 

Page created in 0.02 seconds with 17 queries.