Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to OOF

Pages: [1] 2  All   Go Down

Author Topic: V6 coolant leak at the rear, best way to remove the metal pipe?  (Read 4171 times)

0 Members and 1 Guest are viewing this topic.

Andy89

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Norway
  • Posts: 248
    • 97 3.0 MV6
    • View Profile
V6 coolant leak at the rear, best way to remove the metal pipe?
« on: 26 March 2016, 13:41:50 »
Hello all

My car has developed a leak at the rear of the engine, and the only possible culprit i can see is the metal pipe.
I have been able to feel around all the hoses at the rear, and i feel no coolant, and it leaks down on the left side (passanger side for you in UK)
How can this pipe be taken off, is it possible withut removing the engine/gearbox?  :P
« Last Edit: 26 March 2016, 13:45:51 by Andy89 »
Logged

RobG

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Bristol
  • Posts: 13831
  • I might have a link, pic or part number for that
    • 16 plate Mokka. Vivaro
    • View Profile
Re: V6 coolant leak at the rear, best way to remove the metal pipe?
« Reply #1 on: 26 March 2016, 13:53:51 »
"Trumpets", plenum, inlet manifold out and possibly coolant bridge for more access.
If even more access is preferred you will need to remove all coolant pipes incl. the HBV + hoses.
Logged
All that is necessary for the triumph of evil is that good men do nothing.

UPVC windows/doors/fascias/soffit/gutters supplied/fitted

Andy89

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Norway
  • Posts: 248
    • 97 3.0 MV6
    • View Profile
Re: V6 coolant leak at the rear, best way to remove the metal pipe?
« Reply #2 on: 26 March 2016, 14:00:55 »
Well that seems like an alright job  :)
Must I use some gasket sealant aswell as the o-ring when refitting?
Logged

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 107159
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: V6 coolant leak at the rear, best way to remove the metal pipe?
« Reply #3 on: 26 March 2016, 15:46:10 »
Quote from: Andy89 on 26 March 2016, 13:41:50
Hello all

My car has developed a leak at the rear of the engine, and the only possible culprit i can see is the metal pipe.
I have been able to feel around all the hoses at the rear, and i feel no coolant, and it leaks down on the left side (passanger side for you in UK)
How can this pipe be taken off, is it possible withut removing the engine/gearbox?  :P
Oh shit. Is it a 1998 model (last letter of VIN being a W). If so, check carefully for leaks between block and head that side, right at the back.
Logged
Grumpy old man

Andy89

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Norway
  • Posts: 248
    • 97 3.0 MV6
    • View Profile
Re: V6 coolant leak at the rear, best way to remove the metal pipe?
« Reply #4 on: 26 March 2016, 18:33:06 »
This engine is a late 97 model from a vauxhall omega (same as 98 model), and yes i picked everything apart and filmed with my phone, witch showed the leak is the headgasket, and not the pipe :-\
Is this a know fault for specific engines?
Logged

YZ250

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Oxford/Bucks border
  • Posts: 4679
    • Black 3.2 Elite Estate
    • View Profile
Re: V6 coolant leak at the rear, best way to remove the metal pipe?
« Reply #5 on: 26 March 2016, 18:45:38 »
Quote from: Andy89 on 26 March 2016, 18:33:06
This engine is a late 97 model from a vauxhall omega (same as 98 model), and yes i picked everything apart and filmed with my phone, witch showed the leak is the headgasket, and not the pipe :-\
Is this a know fault for specific engines?

Quite a common fault for the specific 'year' of that engine.  :y I was a victim of the rear corner head gasket leak myself. When I stripped it down the gasket had rotted away but the steel ring was intact so no other issues caused apart from a slight weeping.  :y

« Last Edit: 26 March 2016, 18:48:26 by YZ250 »
Logged
My fun car is a 2020 Bmw F32 430d M Sport with indicators.
My cruiser is an Audi A6 Avant S Line Black Edition with indicators.

Nick W

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Chatham, Kent
  • Posts: 11072
    • Ghastly 1.0l Focus
    • View Profile
Re: V6 coolant leak at the rear, best way to remove the metal pipe?
« Reply #6 on: 26 March 2016, 19:05:29 »
Quote from: YZ250 on 26 March 2016, 18:45:38
Quote from: Andy89 on 26 March 2016, 18:33:06
This engine is a late 97 model from a vauxhall omega (same as 98 model), and yes i picked everything apart and filmed with my phone, witch showed the leak is the headgasket, and not the pipe :-\
Is this a know fault for specific engines?

Quite a common fault for the specific 'year' of that engine.  :y I was a victim of the rear corner head gasket leak myself. When I stripped it down the gasket had rotted away but the steel ring was intact so no other issues caused apart from a slight weeping.  :y


My late '99 3.0l was the same; the gaskets were rotten. Fixing it isn't a difficult job, but it is a lot of work.
Logged

Andy89

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Norway
  • Posts: 248
    • 97 3.0 MV6
    • View Profile
Re: V6 coolant leak at the rear, best way to remove the metal pipe?
« Reply #7 on: 26 March 2016, 23:24:05 »
well this sucks, now i will get to use my refuurbished heads i have laying around then :P
Just hope everything is fine with the pistons, i know this engine has lower compression on 1 or 2 cylinders
« Last Edit: 26 March 2016, 23:27:14 by Andy89 »
Logged

Gaffers

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • NE Hampshire/Surrey
  • Posts: 11322
    • Ford Ranger Wildtrak
    • View Profile
Re: V6 coolant leak at the rear, best way to remove the metal pipe?
« Reply #8 on: 27 March 2016, 19:08:01 »
Swapping heads, including refurbing of originals should take you a long day if you have done that level of job before, 2 days if it's your first time.  As said, it is fairly straight forward.  While the heads are off it is advisable to take the breather box off and clean as well as checking the rear pipe you mentioned in the OP.  They are fantastically accessible once the heads are off, especially if you aren't some lithe lanky streak of piss with tiny hands and you find getting your bear paws around the back a little challenging ;D
Logged

jimbo125

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Male
  • Camberley
  • Posts: 344
    • Vauxhall Omega 2.5V6CDI
    • View Profile
Re: V6 coolant leak at the rear, best way to remove the metal pipe?
« Reply #9 on: 28 March 2016, 01:29:09 »
In the process of taking my heads off, coolant transfer pipe is easier if you remove rear oil cooler pipe and raise it slightly, it gives you access to the top bolt on the transfer pipe :y also can be an idea to redo the cooler plate seal to cover any issue of a leak there :)
Logged
2.5V6 Had it since 2002, what a beast, worth the time and effort to keep it road worthy. Vauxhall bring them back!!! Laser timing kit for OOF member hire

danzigfan

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • Jesenice, Slovenia
  • Posts: 1469
    • Omega 2.5V6, 3.0V6
    • View Profile
Re: V6 coolant leak at the rear, best way to remove the metal pipe?
« Reply #10 on: 28 March 2016, 08:19:05 »
Mine has a small coolant leak at the back ob engine too :-X and I always thought it could be only coolant transfer pipe the reason for that.

Now, after reading this...I'm to afraid to even take a good look where exactly the leak is :-X
Logged
I would rather push omega than drive renault

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 107159
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: V6 coolant leak at the rear, best way to remove the metal pipe?
« Reply #11 on: 28 March 2016, 11:40:21 »
Quote from: danzigfan on 28 March 2016, 08:19:05
Mine has a small coolant leak at the back ob engine too :-X and I always thought it could be only coolant transfer pipe the reason for that.

Now, after reading this...I'm to afraid to even take a good look where exactly the leak is :-X
2.5's not normally affected, only MFL 3.0l
Logged
Grumpy old man

jimbo125

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Male
  • Camberley
  • Posts: 344
    • Vauxhall Omega 2.5V6CDI
    • View Profile
Re: V6 coolant leak at the rear, best way to remove the metal pipe?
« Reply #12 on: 07 April 2016, 01:06:31 »
HG fault so had to remove heads, fire rings ok but fibre part no mush and yet I do regular oil and coolant changes. It is a 98 V6 :-\
Logged
2.5V6 Had it since 2002, what a beast, worth the time and effort to keep it road worthy. Vauxhall bring them back!!! Laser timing kit for OOF member hire

YZ250

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Oxford/Bucks border
  • Posts: 4679
    • Black 3.2 Elite Estate
    • View Profile
Re: V6 coolant leak at the rear, best way to remove the metal pipe?
« Reply #13 on: 07 April 2016, 06:46:40 »
Quote from: TheBoy on 28 March 2016, 11:40:21
Quote from: danzigfan on 28 March 2016, 08:19:05
Mine has a small coolant leak at the back ob engine too :-X and I always thought it could be only coolant transfer pipe the reason for that.

Now, after reading this...I'm to afraid to even take a good look where exactly the leak is :-X
2.5's not normally affected, only MFL 3.0l

Sadly the 2.5 of that era was also affected as that's what mine was.  :y
Logged
My fun car is a 2020 Bmw F32 430d M Sport with indicators.
My cruiser is an Audi A6 Avant S Line Black Edition with indicators.

amba

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Medway towns
  • Posts: 4827
    • German V6
    • View Profile
Re: V6 coolant leak at the rear, best way to remove the metal pipe?
« Reply #14 on: 07 April 2016, 08:10:49 »
My 98 2.5 had a similar issue which I never ever managed to resolved.In fairness it covered 226k when I got rid of it but for the 5 years of ownership couldnt vere trace the slight coolant leak despite doing all the normal ..easier :o..stuff,so expect that was HG corner failure also
Logged
Pages: [1] 2  All   Go Up
« previous next »
 

Page created in 0.011 seconds with 17 queries.