Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[TheBoy]

Small cable needs to go from behind dash into engine bay.

Where is best place to go through?

[Kevin Wood]

Depends if it's the one with the cable throttle or not.
If DBW, there's a handy blanking grommet where the cable used to be.

[TheBoy]

Depends if it's the one with the cable throttle or not.
If DBW, there's a handy blanking grommet where the cable used to be.

Its the superior engine, so some pratt has put a throttle cable through there

[Kevin Wood]

Poke it through the big grommets in the pollen filter area, I guess.

Although.. is there a brown crusty bit on the bulkhead you can poke a hole through?

[Shackeng]

Poke it through the big grommets in the pollen filter area, I guess.

Although.. is there a brown crusty bit on the bulkhead you can poke a hole through?

That's what I used.

[zirk]

Open window, open bonnet, feed cable, job done. 

[Tick Tock]

There's probably more brown crusty bits in the bulkhead area than you might think!!! You'll be spoilt for choice with an Omega 

[TheBoy]

Poke it through the big grommets in the pollen filter area, I guess.

Although.. is there a brown crusty bit on the bulkhead you can poke a hole through?

Ideally wanted a shorter run.  Suppose I'll have to have a poke around.

And, being the superior MFL model, the only rust is on the bodyshell

[05omegav6]

Poke it through the big grommets in the pollen filter area, I guess.

Although.. is there a brown crusty bit on the bulkhead you can poke a hole through?

Ideally wanted a shorter run.  Suppose I'll have to have a poke around.

And, being the superior MFL model, the only rust is on the bodyshell

Think you'll find the bulkhead is a critical bodyshell component

Just off to the right of the throttle cable is another loom run

[TheBoy]

Rain stopped play (not that play started )

[Lazydocker]

Either as HKT says or, iIIRC, there is enough space in the throttle cable grommet to squeeze another cable through

Failing that... Follow where we poked the LPG wires through

[05omegav6]

Pop the scuttle off and follow the brakefluid/coolant sensor   
loom back towards the dash

[Andy B]

I found a small blanking grommet underneath the large loom that passes through the bulkhead in the pollen filter housing on my MFL

[05omegav6]

I found a small blanking grommet underneath the large loom that passes through the bulkhead in the pollen filter housing on my MFL

If you're going all the way over there, then you might as well pop it through with the rest of the loom

[Andy B]

I found a small blanking grommet underneath the large loom that passes through the bulkhead in the pollen filter housing on my MFL

If you're going all the way over there, then you might as well pop it through with the rest of the loom

Just availing Jamie to all the options .....