Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[robson]

 Ron.   That is the price shown on ebay so I assume that is the full price. for a 2.5 system

[robson]

Eternal exhausts are supplied by eternalcar-ltd ?  just to be sure.

[Bigron]

£66.91 plus 30% for VAT comes mighty close to that £80 price.....

Ron.

[robson]

Hello Ron Just put that exhaust into my basket and got a price of £103.40 no explanation of extra cost but still cheap for a cats back system.

[robson]

Hello Ron Sorry got that price all wrong my basket had other things in it.Have ordered the exhaust and the price was £66.91.Cant understand so we will see what happens.

[steve6367]

any body purchased an exhaust system from" premium car"They list one for a 2.6

Yes on 2 of mine, no problems.

[Steve B]

Which one is it for the 3.2 from them  ... my backbox is on one side but is a twin pipe

[robson]

If you look at eternal on  fleaba They list an exhaust with the 2 outlets on the back box.

[Steve B]

If you look at eternal on  fleaba They list an exhaust with the 2 outlets on the back box.

Is it this one for a 3.2 although it says 3ltr

http://www.ebay.co.uk/itm/Full-exhaust-system-mounting-kit-VAUXHALL-OMEGA-B-3-0-V6-Saloon-1994-2001-/361431046451?hash=item5426f81933:g:erQAAOSwIwhWS0yN

[biggriffin]

If you look at eternal on  fleaba They list an exhaust with the 2 outlets on the back box.

Is it this one for a 3.2 although it says 3ltr

http://www.ebay.co.uk/itm/Full-exhaust-system-mounting-kit-VAUXHALL-OMEGA-B-3-0-V6-Saloon-1994-2001-/361431046451?hash=item5426f81933:g:erQAAOSwIwhWS0yN

That do yeah,, will have twin outlets, as it's 3.0L, but otherwise no difference for fitting.

[Steve B]

If you look at eternal on  fleaba They list an exhaust with the 2 outlets on the back box.

Is it this one for a 3.2 although it says 3ltr

http://www.ebay.co.uk/itm/Full-exhaust-system-mounting-kit-VAUXHALL-OMEGA-B-3-0-V6-Saloon-1994-2001-/361431046451?hash=item5426f81933:g:erQAAOSwIwhWS0yN

That do yeah,, will have twin outlets, as it's 3.0L, but otherwise no difference for fitting.

Cheers biggriffin  The one going rotten on the car has the twin talepipe

Whats the order....up with front of car/undo from cats(which will snap)(drill)use nuts and bolts and fit two middle sections..down with car and up with the rear and fit back box

[terry paget]

If you look at eternal on  fleaba They list an exhaust with the 2 outlets on the back box.

Is it this one for a 3.2 although it says 3ltr

http://www.ebay.co.uk/itm/Full-exhaust-system-mounting-kit-VAUXHALL-OMEGA-B-3-0-V6-Saloon-1994-2001-/361431046451?hash=item5426f81933:g:erQAAOSwIwhWS0yN

That do yeah,, will have twin outlets, as it's 3.0L, but otherwise no difference for fitting.

Cheers biggriffin  The one going rotten on the car has the twin talepipe

Whats the order....up with front of car/undo from cats(which will snap)(drill)use nuts and bolts and fit two middle sections..down with car and up with the rear and fit back box

Drilling out the cat section holes is difficult and time consuming. Better by far is to heat the cat section with the bolt threads in with an MAPP torch until it glows red, allow to cool, spray with WD40 or penetrating oil, and carefully unscrew the bolts.

[Steve B]

If you look at eternal on  fleaba They list an exhaust with the 2 outlets on the back box.

Is it this one for a 3.2 although it says 3ltr

http://www.ebay.co.uk/itm/Full-exhaust-system-mounting-kit-VAUXHALL-OMEGA-B-3-0-V6-Saloon-1994-2001-/361431046451?hash=item5426f81933:g:erQAAOSwIwhWS0yN

That do yeah,, will have twin outlets, as it's 3.0L, but otherwise no difference for fitting.

Cheers biggriffin  The one going rotten on the car has the twin talepipe

Whats the order....up with front of car/undo from cats(which will snap)(drill)use nuts and bolts and fit two middle sections..down with car and up with the rear and fit back box

Drilling out the cat section holes is difficult and time consuming. Better by far is to heat the cat section with the bolt threads in with an MAPP torch until it glows red, allow to cool, spray with WD40 or penetrating oil, and carefully unscrew the bolts.

Dont have no form of heat and i see i need £70+ to get one of them...seen posts on here where they say they have drlled them out...

[terry paget]

If you look at eternal on  fleaba They list an exhaust with the 2 outlets on the back box.

Is it this one for a 3.2 although it says 3ltr

http://www.ebay.co.uk/itm/Full-exhaust-system-mounting-kit-VAUXHALL-OMEGA-B-3-0-V6-Saloon-1994-2001-/361431046451?hash=item5426f81933:g:erQAAOSwIwhWS0yN

That do yeah,, will have twin outlets, as it's 3.0L, but otherwise no difference for fitting.

Cheers biggriffin  The one going rotten on the car has the twin talepipe

Whats the order....up with front of car/undo from cats(which will snap)(drill)use nuts and bolts and fit two middle sections..down with car and up with the rear and fit back box

Drilling out the cat section holes is difficult and time consuming. Better by far is to heat the cat section with the bolt threads in with an MAPP torch until it glows red, allow to cool, spray with WD40 or penetrating oil, and carefully unscrew the bolts.

Dont have no form of heat and i see i need £70+ to get one of them...seen posts on here where they say they have drlled them out...

Here's one at £24.
http://gasproducts.co.uk/gosystem-qp8937h-quick-pro-auto-swirl-gas-blow-torch.html?gclid=COudjt3Wlc4CFUU6Gwodt54NFA
I have had mine for years, marvellous tool. I found drilling out the old screws a rotten job. It's easy to break off the drill bits in the hardened steel, then you're really in trouble. I bought special cobalt drill bits, no better. I cursed Vx for switching from the Senator system of replaceable screws through holes to the Omega threads in the cat section; it made for easy assembly on the line but more difficult replacement.

[Steve B]

If you look at eternal on  fleaba They list an exhaust with the 2 outlets on the back box.

Is it this one for a 3.2 although it says 3ltr

http://www.ebay.co.uk/itm/Full-exhaust-system-mounting-kit-VAUXHALL-OMEGA-B-3-0-V6-Saloon-1994-2001-/361431046451?hash=item5426f81933:g:erQAAOSwIwhWS0yN

That do yeah,, will have twin outlets, as it's 3.0L, but otherwise no difference for fitting.

Cheers biggriffin  The one going rotten on the car has the twin talepipe

Whats the order....up with front of car/undo from cats(which will snap)(drill)use nuts and bolts and fit two middle sections..down with car and up with the rear and fit back box

Drilling out the cat section holes is difficult and time consuming. Better by far is to heat the cat section with the bolt threads in with an MAPP torch until it glows red, allow to cool, spray with WD40 or penetrating oil, and carefully unscrew the bolts.

Dont have no form of heat and i see i need £70+ to get one of them...seen posts on here where they say they have drlled them out...

Here's one at £24.
http://gasproducts.co.uk/gosystem-qp8937h-quick-pro-auto-swirl-gas-blow-torch.html?gclid=COudjt3Wlc4CFUU6Gwodt54NFA
I have had mine for years, marvellous tool. I found drilling out the old screws a rotten job. It's easy to break off the drill bits in the hardened steel, then you're really in trouble. I bought special cobalt drill bits, no better. I cursed Vx for switching from the Senator system of replaceable screws through holes to the Omega threads in the cat section; it made for easy assembly on the line but more difficult replacement.

Ok you sold me the idea terry...I bought one 

I understand that heating the part a bolt is threaded into will make it expand and hopefully now the bolt will come out easier... but why wait for the nut side to go cold