Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to OOF

Pages: 1 2 3 [4]  All   Go Down

Author Topic: Need part numbers for a wishbone refurb  (Read 8943 times)

0 Members and 1 Guest are viewing this topic.

Andy A

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • Bristol UK
  • Posts: 1101
    • Omega 2.2i CD manual 2003
    • View Profile
Re: Need part numbers for a wishbone refurb
« Reply #45 on: 01 November 2016, 11:31:13 »
Quote from: Nick W on 29 October 2016, 14:00:15
Mine has had poly bushes for over five years. Used the lithium grease that came with them, and haven't touched them since.

A geometry check isn't necessary if you do have to lubricate them.

Poly bushes eliminate a number of suspension issues cheaply and easily. They are a must have part

Nike I thought I had some white lithium grease in the garage. Just looked and its not white Lithium its calcium sulphonate based, Ramonol Advanced White Marine Grease.

http://www.ebay.co.uk/itm/Ramonol-Advanced-White-Marine-Grease-500g-/252169662902?hash=item3ab67bb1b6:g:2rwAAOSwEgVWRgMX

Is this a similar sort of stuff as the white Lithium grease you use and will it do the same job?

Thanks   
Logged

Doctor Gollum

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • In a colds and darks puddleses
  • Posts: 29818
  • If you can't eat them, join them...
    • Feetses.
    • View Profile
Re: Need part numbers for a wishbone refurb
« Reply #46 on: 01 November 2016, 11:59:27 »
Copperslip :-X
Logged
Onanists always think outside the box.

Andy A

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • Bristol UK
  • Posts: 1101
    • Omega 2.2i CD manual 2003
    • View Profile
Re: Need part numbers for a wishbone refurb
« Reply #47 on: 02 November 2016, 13:53:03 »
Quote from: Doctor Gollum on 01 November 2016, 11:59:27
Copperslip :-X

I thought it looked like Copperslip on the photos. Yet on the Powerflex web site it says its their own formulated PTFE/Silicone bush assembly grease.

https://www.powerflex.co.uk/road-series/fitting-guides#

Looks like they might have changed it to Silicone with PTFE.
Logged

Doctor Gollum

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • In a colds and darks puddleses
  • Posts: 29818
  • If you can't eat them, join them...
    • Feetses.
    • View Profile
Re: Need part numbers for a wishbone refurb
« Reply #48 on: 02 November 2016, 14:02:02 »
Possible... not bought any recently to confirm ;)
Logged
Onanists always think outside the box.

Diamond Black Geezer

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • N E Lincolnshire & Warwickshire
  • Posts: 5701
  • Diamond Black '96 CDX V6 - 'Pissy'
    • & a silly coupe coming...
    • View Profile
Re: Need part numbers for a wishbone refurb
« Reply #49 on: 02 November 2016, 15:34:45 »
It was copperslip with mine, but that was about *?£%& years ago now. I think I used red grease last time for no real reason other than I wasnt sure if 'normal grease' would corrode the poly as it does rubber. I suspect not, though. Vaseline, grease, copperslip, whatever I'm sure will be fine.  :)
Logged
Ex-Dealer Kent-Moore Rear Wheel Bearing Tool available for hire, PM for details.

"There's no point in being grown up if you can't be childish sometimes." 4th Doctor

Doctor Gollum

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • In a colds and darks puddleses
  • Posts: 29818
  • If you can't eat them, join them...
    • Feetses.
    • View Profile
Re: Need part numbers for a wishbone refurb
« Reply #50 on: 02 November 2016, 16:51:54 »
Rubber is a natural product and therefore susceptible to chemical attack and rapid fatigue in unsuitable applications. Polyurethane, however, is about as unnatural as Angela Merkel and Jimmy Krankee having a baby... And is pretty much bombproof ;)
Logged
Onanists always think outside the box.

Diamond Black Geezer

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • N E Lincolnshire & Warwickshire
  • Posts: 5701
  • Diamond Black '96 CDX V6 - 'Pissy'
    • & a silly coupe coming...
    • View Profile
Re: Need part numbers for a wishbone refurb
« Reply #51 on: 03 November 2016, 09:04:11 »
Or indeed, as unnatural as Angela Merkel, and Jimmy Krankie...  :D
Logged
Ex-Dealer Kent-Moore Rear Wheel Bearing Tool available for hire, PM for details.

"There's no point in being grown up if you can't be childish sometimes." 4th Doctor
Pages: 1 2 3 [4]  All   Go Up
« previous next »
 

Page created in 0.01 seconds with 16 queries.