Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[pigtown]

Replaced the crank sensor - not easy to get at!!!
It was running well and I did about 50 miles all looking good then it went back into limp mode again!!
Haven't read the codes yet.
Ive changed all the sensors so what next.
Can't be a real mechanical fault as it was running great between limp modes.

[Elite_L0ver]

Hi sorry if its been covered but whats it like idleing is it ok

Reason i ask SWMBO Zaffy threw up similar codes and was idleing like a bag of nails after changing cam cover gaskets i was stuck for hours it was throwing a wobbler to then relise id forgotten to reconnect gearbox breather so its either

A) pipe not connected

B) Split in pipe

Might be worth a check

[pigtown]

Hi, idling is ok. I have cleaned the crankcase breather, which I think is the one you are referring to. It is back on and in one piece. Thanks for trying though.

[pigtown]

Cleared all the codes again and went for a drive. Did over 50 miles and all ok.
But I have now read the codes again and now get:

P1740
P1781
P1525
P1612
P1613

so some different codes than before even though it has been running ok.........I'm confused....any ideas?