Topic: 2.5 TD Length & Width(!) (Read 1149 times)

jtypecav · « **on:** 02 February 2017, 22:38:16 »

So, as a side project I seem to have purchased a little Polish fire engine.
Given everything I have is either an omega or omega powered. I was wondering if someone could measure their block for me!

I need the length, width and height of the substantial engine itself, to see if it will go in the hole.
(It mounts from underneath and would have to fit between the ladder chassis, and ideally not stick out at the front!

If anyone has a magnificent beast and is able to measure, or has an X25TD kicking about in the SW I can come have a look at do let me know.
Yes, I did consider running a silky smooth 3.0 petrol, but need this to do some miles and is going to be heavy as it's 1450kg before I've bolted anything like a high top to it yet!

If you have a 2.5 and a measuring tape I'd greatly appreciate it. I've googled about the M51 everywhere and can't even find the dimensions of the block online!

Shackeng · « **Reply #1 on:** 03 February 2017, 19:21:39 »

Well I have a TD, but trying to measure the engine size in situ defeats me, sorry.

jtypecav · « **Reply #2 on:** 03 February 2017, 19:58:00 »

At this point I'd take an approx length / width height best guess ballpark with a tape measure!

News:

Author Topic: 2.5 TD Length & Width(!) (Read 1149 times)

jtypecav

2.5 TD Length & Width(!)

Shackeng

Re: 2.5 TD Length & Width(!)

jtypecav

Re: 2.5 TD Length & Width(!)