Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[razzo]

Will be tackling a few rust spots under the car with a wire wheel in a drill soon, so anyone recommend a protective coating I can apply by brush. Neighbours would not be too impressed if I dragged compressor out onto the street & car won't fit in the shed

[Bojan]

I'd go with base paint and then underbody protection (unterbodenshultz). Both are available in spray cans.

[Doctor Gollum]

Dinitrol aerosols effective, if you can find them...

[Kevin Wood]

Bilt Hamber stuff is also worth a look.

[minifreek]

CarPlan spray underseal is bloody good stuff....

[omega2018]

Will be tackling a few rust spots under the car with a wire wheel in a drill soon, so anyone recommend a protective coating I can apply by brush. Neighbours would not be too impressed if I dragged compressor out onto the street & car won't fit in the shed

Dinitrol aerosols effective, if you can find them...

not much use with a brush though

this stuff is good and easy to brush on: https://www.amazon.co.uk/gp/product/B002HMTWYY i would apply a rust converter like vactan first but if you're wire wheeling it then you could probably put the underseal straight on. 

[Zirfeld]

Have a serious look under sealed areas. Most Omegas have hidden rust there!

[neil74]

The rust is usually peeking out from under the underseal tempting you to have a poke about thinking it wont be much. but we all know better don't we and it's all rather depressing when you see it in all it's ugliness...

[omegod]

Inner rear arch on the Estate I've just broken up looked ok till I peeled back the underseal and had a little poke, I was surprised when I got to the back seat cloth !