Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Search the maintenance guides for answers to 99.999% of Omega questions

Pages: [1] 2 3 4  All   Go Down

Author Topic: Car not starting. Code p0650 still present  (Read 7390 times)

0 Members and 1 Guest are viewing this topic.

berserkerboy

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Male
  • Llansadwrn, Carmarthenshire SA19
  • Posts: 413
    • 3.2 V6 Elite 02 LPG
    • View Profile
Car not starting. Code p0650 still present
« on: 22 May 2017, 20:03:29 »
Hi folks wondering if anyone can help with the above.

Had been using the car so it was hot. I had switched engine off, but when I tried to restart the car it turned over but wouldn't start. I played around with the starter motor turning and switching between petrol and gas and the car finally started. I think I may have managed to start it on gas. The car ran fine. As soon as I turned it off it wouldn't start again.

Have used "My Naff Code Reader" on it and the following codes showed.

P0650 (4) unknown present
P0430 (1) unknown present
P0420 (1) unknown not present
P1612 (0) unknown not present

cleared faults and attempted to start again with no luck.

P0650 showed up again.

This is listed as:

P0650 Malfunction Indicator (MI) Control Circuit High Instrument
P0650 Malfunction Indicator (MI) Control Circuit Low Instrument
P0650 Malfunction Indicator (MI) Control Circuit Open Instrument

Anyone know what this is?

Cheers
Logged

Doctor Gollum

  • Get A Life!!
  • *****
  • Online Online
  • Gender: Male
  • In a colds and darks puddleses
  • Posts: 29992
  • If you can't eat them, join them...
    • Feetses.
    • View Profile
Re: Car not starting. Code p0650 still present
« Reply #1 on: 22 May 2017, 20:12:15 »
Engine management light blown or missing ;)

Won't affect starting though...
Logged
Onanists always think outside the box.

Doctor Gollum

  • Get A Life!!
  • *****
  • Online Online
  • Gender: Male
  • In a colds and darks puddleses
  • Posts: 29992
  • If you can't eat them, join them...
    • Feetses.
    • View Profile
Re: Car not starting. Code p0650 still present
« Reply #2 on: 22 May 2017, 20:12:39 »
What's the fuel level?
Logged
Onanists always think outside the box.

berserkerboy

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Male
  • Llansadwrn, Carmarthenshire SA19
  • Posts: 413
    • 3.2 V6 Elite 02 LPG
    • View Profile
Re: Car not starting. Code p0650 still present
« Reply #3 on: 22 May 2017, 22:08:34 »
Over 1/4 full tank. Funily enough I had only just put a bit more fuel in......surely not the reason? Duff fuel? Yes EML was removed by previous owner after LPG instal as it was continually on.
Logged

berserkerboy

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Male
  • Llansadwrn, Carmarthenshire SA19
  • Posts: 413
    • 3.2 V6 Elite 02 LPG
    • View Profile
Re: Car not starting. Code p0650 still present
« Reply #4 on: 22 May 2017, 22:13:04 »
P1612 Immobiliser No Or Wrong Signal Immobiliser

This code had been generated but was no longer present. It didn't get regenerated once cleared. I could understand why the car wont start if there was an issue here
Logged

Lazydocker

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Woodbridge, Suffolk
  • Posts: 18848
  • Constantly Bullied by a certain Admin
    • View Profile
Re: Car not starting. Code p0650 still present
« Reply #5 on: 22 May 2017, 22:23:15 »
Quote from: berserkerboy on 22 May 2017, 22:08:34
Over 1/4 full tank. Funily enough I had only just put a bit more fuel in......surely not the reason? Duff fuel? Yes EML was removed by previous owner after LPG instal as it was continually on.

Which means the LPG installation is sub-standard and could (potentially) cause engine problems.  ::)

As for the current problem, I'd put my 2p on Crank Sensor failing :-X
Logged
Whatever it is... I didn't do it

berserkerboy

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Male
  • Llansadwrn, Carmarthenshire SA19
  • Posts: 413
    • 3.2 V6 Elite 02 LPG
    • View Profile
Re: Car not starting. Code p0650 still present
« Reply #6 on: 22 May 2017, 22:29:33 »
Quote from: Lazydocker on 22 May 2017, 22:23:15
Quote from: berserkerboy on 22 May 2017, 22:08:34
Over 1/4 full tank. Funily enough I had only just put a bit more fuel in......surely not the reason? Duff fuel? Yes EML was removed by previous owner after LPG instal as it was continually on.

Which means the LPG installation is sub-standard and could (potentially) cause engine problems.  ::)

As for the current problem, I'd put my 2p on Crank Sensor failing :-X
Wouldn't that generate a code?
Logged

berserkerboy

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Male
  • Llansadwrn, Carmarthenshire SA19
  • Posts: 413
    • 3.2 V6 Elite 02 LPG
    • View Profile
Re: Car not starting. Code p0650 still present
« Reply #7 on: 22 May 2017, 22:30:37 »
Crank sensor was replaced a couple years ago. Probably only about 10k done since.
Logged

berserkerboy

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Male
  • Llansadwrn, Carmarthenshire SA19
  • Posts: 413
    • 3.2 V6 Elite 02 LPG
    • View Profile
Re: Car not starting. Code p0650 still present
« Reply #8 on: 22 May 2017, 22:44:15 »
Just googled car not starting after refuel.

Found this regarding a vectra: Check the condition of your petrol filter under the rear drivers side wheel, if its rusty its probably got a slight leak and when you open the fuel cap you cause a air lock.

Will check it tomorrow. I guess a mechanical problem like this wouldn't generate a code but I would have thought I'd be able to smell fuel?

Logged

BazaJT

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • SLady bitshorpe N.Lincs.
  • Posts: 9278
    • Omega 3 litre Elite
    • View Profile
Re: Car not starting. Code p0650 still present
« Reply #9 on: 23 May 2017, 08:06:05 »
My money would be on crank sensor too.When you replaced yours a while back did you use genuine GM? or A.N.Other? I believe crank sensor failure doesn't always throw a code,others may be able to advise better on that.
Logged

Doctor Gollum

  • Get A Life!!
  • *****
  • Online Online
  • Gender: Male
  • In a colds and darks puddleses
  • Posts: 29992
  • If you can't eat them, join them...
    • Feetses.
    • View Profile
Re: Car not starting. Code p0650 still present
« Reply #10 on: 23 May 2017, 10:27:21 »
Agreed re crank sensor, although as LD suggests, lpg install being less than great could point to other issues.

If an estate, put another 2 gallons in and retry :y
Logged
Onanists always think outside the box.

terry paget

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Midsomer Norton Somerset
  • Posts: 4633
    • 3 Astras 2 Vectra
    • View Profile
Re: Car not starting. Code p0650 still present
« Reply #11 on: 23 May 2017, 13:53:23 »
It's easier to check fuel feed by removing the feed pipe at manifold, then having wife crank engine while you point the pipe into a jar.
Is it possible you put in diesel, not petrol? 
Logged

zirk

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Epping Forest
  • Posts: 11443
  • 3.2 Manual Special Saloon ReMapped and LPG'd and
    • 3.2 Manual Special Estate
    • View Profile
Re: Car not starting. Code p0650 still present
« Reply #12 on: 23 May 2017, 14:46:16 »
Does it start ok if you false start it on LPG?
Logged

berserkerboy

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Male
  • Llansadwrn, Carmarthenshire SA19
  • Posts: 413
    • 3.2 V6 Elite 02 LPG
    • View Profile
Re: Car not starting. Code p0650 still present
« Reply #13 on: 23 May 2017, 18:00:42 »
Quote from: BazaJT on 23 May 2017, 08:06:05
My money would be on crank sensor too.When you replaced yours a while back did you use genuine GM? or A.N.Other? I believe crank sensor failure doesn't always throw a code,others may be able to advise better on that.

It was OE, bosch I think
Logged

berserkerboy

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Male
  • Llansadwrn, Carmarthenshire SA19
  • Posts: 413
    • 3.2 V6 Elite 02 LPG
    • View Profile
Re: Car not starting. Code p0650 still present
« Reply #14 on: 23 May 2017, 18:07:30 »
Quote from: zirk on 23 May 2017, 14:46:16
Does it start ok if you false start it on LPG?

I think I did this and yes it was running okay until I turned it off again. How do you false start on LPG so I can try that again? The system is stag 300 plus.
I think as it was running okay on gas that maybe the crank sensor is okay.
I have been reading that LPG cars sometimes get a petrol pump failure due to running around with 1/4 tank of fuel.
New filter ordered and can get a new pump for £20 if necessary.
Logged
Pages: [1] 2 3 4  All   Go Up
« previous next »
 

Page created in 0.014 seconds with 16 queries.