Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Steveh]

If I remember right the mark on the crank pully should be about 4 o'clock theres a pointed marker that sticks out it should align with

When the camshafts are by their marks the crank mark is not pointing straight down as I think it is supposed to , it points to 4 o clock ( how do I upload pictures?)

[addy]

The mark on the pulley, lines up with a cutout at the bottom of the crank shield.
You can just see it on here. It is a notch. The crank mark is about the same size, in width. On the picture I have just timed the engine up. And have fitted the locking tool into the cam sprockets.

[addy]

This is the mark, that can be seen with the crank pulley still on. To do the timing belt, the pulley has to come off.

[Steveh]

Just checked the mark on the actual cam belt pulley should be straight down as addy posted but there's another mark on the aux belt pulley that should line up with the pointer.

[addy]

Hi Veralum

For uploading pictures to here and other boards. I use this site, https://postimages.org/ it is free and you can drag and drop pictures. I set the image size to message boards, via the do not resize image option.  Once you have uploaded your photo, click on it. Then press the SHARE button , it will open a load of different links. The one you want is the direct link option. Press the button next to it that looks like a clipboard, this will copy the link. On the OOF forum, when you write your message. And want to add a photo, you select the button (it looks like a picture, below the Capital B button on the left. Then paste the link of your photo in between the img and /img. You can check if photo has loaded by doing a preview first.

Hope this helps.

[veralum]

I rebuilt the head and all is fine, car runs great and passed its mot

[Andy B]

I rebuilt the head and all is fine, car runs great and passed its mot

  A result 

[JamesV6CDX]