Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Enceladus]

Not to mention that the signal from the Carlton seems to be less noisy than the OP is getting.

[LC0112G]

Once you get the bit between your teeth, Malcolm.........

The question occasionally crops up in 'another place', and now I've got something to beat the non-believers over the head with

[bkorven]

Thank you for your input and measurements, LC0112G!

It's so nice to have a benchmark, and to have ones suspicions confirmed. Your signal is significantly stronger.

[bkorven]

This will be the final update, an end to it all.

The steering knuckles arrived, and were installed tonight. Look below for the result!







1.220 V @ 76 Hz (~1.6 revolutions / sec). For comparisson, I previously managed to get about 30mV at that speed with the other sensors.

I'm a bit surprised, the voltage is even higher than I was hoping for. Regardless, the signal is super clean and the ABS is working flawlessly. Case closed. FINALLY!

Conclusion: Avoid shady beer-named brands for sensors. And do not expect to be able to remove ABS-sensors.

Thank you all for helping me out!