Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please play nicely.  No one wants to listen/read a keyboard warriors rants....

Pages: [1]   Go Down

Author Topic: Crankshaft sensor question.  (Read 94 times)

0 Members and 1 Guest are viewing this topic.

Mutha Jugs n Speed

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Male
  • Out there?
  • Posts: 409
    • Nosey aint'cha
    • View Profile
Crankshaft sensor question.
« on: 20 April 2025, 12:32:48 »
Having a bit of a stock take this morning, and was looking through the crank sensors, and all OE, no knock offs. But checking the part numbers,  they were all 90492006, but upon checking the plugs, there was a mix of square and oval plugs and all three pin. So could the square ones be used on my 3.2's?  :-\
Logged

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 106814
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: Crankshaft sensor question.
« Reply #1 on: Yesterday at 11:58:40 »
Are the plastic at sensor end, or more like a metal fitting (I'm going from memory).  If the latter, they are for early 2.5s.

Later 2.5/3.0/2.6/3.2 all took same sensor.  Sadly, GM's EPC always have the incorrect one.
Logged
Grumpy old man

Mutha Jugs n Speed

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Male
  • Out there?
  • Posts: 409
    • Nosey aint'cha
    • View Profile
Re: Crankshaft sensor question.
« Reply #2 on: Yesterday at 15:03:03 »
I don't know whether they are going to fit the car, as the person who is 'stuck' has zero knowledge as to what the car requires and who's going to fit it, so  I'm sending both FOC as a favour, and at this point he's on his own as far as fitment etc. :-\
Logged
Pages: [1]   Go Up
« previous next »
 

Page created in 0.016 seconds with 16 queries.