Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please play nicely.  No one wants to listen/read a keyboard warriors rants....

Pages: [1] 2  All   Go Down

Author Topic: x25xe wont start on my 1998 omega b  (Read 8933 times)

0 Members and 2 Guests are viewing this topic.

kaisergaragerpt

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • Portugal
  • Posts: 12
    • Omega b
    • View Profile
x25xe wont start on my 1998 omega b
« on: 26 July 2025, 22:32:30 »
Hi,

Im almost certain I have to change the cranck sensor, but recently when I plugged the computer to the car I saw the strangest thing:

Engine Type,4 Cylinder
Ignition Coil Cyl. 1+4 (Cylinder),Load
Ignition Coil Cyl. 2+5,Load
Ignition Coil Cyl. 3+6 (Cylinder),Load

Is this a thing?  :o

I cleard all the fault codes and the reason no crack sensor fault is on, is cos I've tried an inferior one but with no results I have to aim for the better ones


Here is the diagnose
 
Quote
VAUX-COM 120309a - PC based diagnostic tool

Date and time>,26/07/2025. 21:3043

Workshop information:

Please add your workshop
name in the settings window


Selected model>,1998 (W),Omega-B,Engine,X 25 XE

Control Unit:

KW82 protocol initialized.

ECU ID= HH,90492382,0261203588,1267358989,03,


Measuring blocks information:

Identifier,0D
Battery Voltage,13.0 V
Immobiliser Signal,Received
Immobiliser,Active
TPS Signal (Throttle Position Sensor),0.57 V
Simulated Idle Position,Active
Simulated Full Load Switch,Inactive
Mass Air Flow Sensor,0.00 V
Mass Air Flow Sensor,0 kg/h
Coolant Temperature,3.27 V
Coolant Temperature,26 °C
Intake Air Temperature,3.14 V
Intake Air Temperature,29 °C
Engine Type,4 Cylinder
Transmission Coding,Manual Transmission
Park/Neutral Switch,P - N  0V
A/C Information Switch (Air Conditioning),Inactive 0V
A/C Compressor Switch (Air Conditioning),Inactive 0V
Telltale (Check Light),On  0V
Fuel Pump Relay,Inactive 12V
Spark Angle before TDC (Top Dead Centre),0 °CA
Ignition Coil Cyl. 1+4 (Cylinder),Load
Ignition Coil Cyl. 2+5,Load
Ignition Coil Cyl. 3+6 (Cylinder),Load
Knock Signal,Inactive
Knock Retard,0 °CA
Secondary Air Pump Relay,Active 0V
EGR Valve (Exhaust-Gas Recirculation),Inactive
EGR Position Feedback (Exhaust Gas Recirculation),0.00 V
Fuel Tank Ventilation Valve,0 %
O2 Sensor 1,1205 mV
O2 Sensor 2,1244 mV
O2 Sensor Loop 1,Open
O2 Sensor Loop 2,Open
Air/Fuel Ratio 1,Lean
Air/Fuel Ratio 2,Lean
O2-Loop 1 Integrator,255 Steps
O2-Loop 2 Integrator,255
O2-Loop 1 BLM Idle (Block Learn Map),255 Steps
O2-Loop 2 BLM Idle (Block Learn Map),255 Steps
O2-Loop 1 BLM Partial Load (Block Learn Map),0 Steps
O2-Loop 2 BLM Partial Load(Block Learn Map),0 Steps
Hall Sensor,Inactive
Engine Speed Pulse,Inactive
Engine Speed,0 RPM
Idle Air Control,0 Steps
IAC Integrator (Idle Air Control),8 Steps
IAC Adaptation Slope (Idle Air Control),255 Steps
IAC Block Learn (Idle Air Control),8 Steps
Desired Idle Air,0 kg/h
Actual Value Idle Air,0 kg/h
Desired Engine Idle Speed,2470 RPM
Injection Pulse,95.2 ms
Engine Load Signal,0.0 ms
TPS Load Signal (Throttle Position Sensor),0 %
Vehicle Speed Pulse,Not Received 12V
Vehicle Speed,0 km/h
Intake Manifold Valve 1,Inactive 12V
Intake Manifold Valve 2,Inactive 12V
Torque Control,Inactive
A/C Cutoff Relay (Air Conditioning),Inactive 12V
Diagnostic Request,Inactive 5V
Logged

Doctor Gollum

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • In a colds and darks puddleses
  • Posts: 30176
  • If you can't eat them, join them...
    • Feetses.
    • View Profile
Re: x25xe wont start on my 1998 omega b
« Reply #1 on: 26 July 2025, 23:16:56 »
Dis pack failure?

It's definitely a 'thing'... They fail over time and they really don't like water.
Logged
Onanists always think outside the box.

kaisergaragerpt

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • Portugal
  • Posts: 12
    • Omega b
    • View Profile
Re: x25xe wont start on my 1998 omega b
« Reply #2 on: 27 July 2025, 00:22:45 »
well new dis pack on the way.
never  guessd this would be a money pit ;D
Logged

Clarkey

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Ireland
  • Posts: 104
    • 01 3.2 Auto Executive
    • View Profile
Re: x25xe wont start on my 1998 omega b
« Reply #3 on: 27 July 2025, 00:49:00 »
Simple test for crank sensor is with diagnostic interface, look at live data for engine rpm signal. Should be 300ish rpm when cranking over.
Logged

Doctor Gollum

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • In a colds and darks puddleses
  • Posts: 30176
  • If you can't eat them, join them...
    • Feetses.
    • View Profile
Re: x25xe wont start on my 1998 omega b
« Reply #4 on: 27 July 2025, 06:33:28 »
All that information and no cam sensor data...
Logged
Onanists always think outside the box.

kaisergaragerpt

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • Portugal
  • Posts: 12
    • Omega b
    • View Profile
Re: x25xe wont start on my 1998 omega b
« Reply #5 on: 27 July 2025, 10:48:35 »
Quote from: Clarkey on 27 July 2025, 00:49:00
Simple test for crank sensor is with diagnostic interface, look at live data for engine rpm signal. Should be 300ish rpm when cranking over.

It's 0rpm ;D returning this delphi one. Can't recommend
Logged

Enceladus

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • London
  • Posts: 1106
    • View Profile
Re: x25xe wont start on my 1998 omega b
« Reply #6 on: 27 July 2025, 14:01:16 »
What's the Delphi part number? Might it be SS10809?

In that case it is an incorrect part. The resistance is incorrect @ 0.59kΩ. The original Bosch part has a resistance of 0.86kΩ.

The correct GM part # for your car should be 90540743 which is Bosch part  0-261-210-131. A factory original sensor will have both those numbers on it. Sometimes GM parts also have a parallel factory production part number, in this case 90494182. Cadillac and Saab use the factory production part number as the spare part number, but it's still the same Bosch 0-261-210-131. This sensor has an oval sided connector.

So have a look at the sensor you removed in the first place, if you still have it? I expect you'll see a Bosch logo and 0-261-210-131 on it.

Be aware that Bosch no longer manufacture these sensors in Germany. They are now made in Slovenia, if they're still made at all. Even the GM special order ones that were available until a few years ago are the Slovenia parts.
« Last Edit: 27 July 2025, 14:13:58 by Enceladus »
Logged

kaisergaragerpt

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • Portugal
  • Posts: 12
    • Omega b
    • View Profile
Re: x25xe wont start on my 1998 omega b
« Reply #7 on: 27 July 2025, 19:08:31 »
Quote from: Enceladus on 27 July 2025, 14:01:16
What's the Delphi part number? Might it be SS10809?

In that case it is an incorrect part. The resistance is incorrect @ 0.59kΩ. The original Bosch part has a resistance of 0.86kΩ.

The correct GM part # for your car should be 90540743 which is Bosch part  0-261-210-131. A factory original sensor will have both those numbers on it. Sometimes GM parts also have a parallel factory production part number, in this case 90494182. Cadillac and Saab use the factory production part number as the spare part number, but it's still the same Bosch 0-261-210-131. This sensor has an oval sided connector.

So have a look at the sensor you removed in the first place, if you still have it? I expect you'll see a Bosch logo and 0-261-210-131 on it.

Be aware that Bosch no longer manufacture these sensors in Germany. They are now made in Slovenia, if they're still made at all. Even the GM special order ones that were available until a few years ago are the Slovenia parts.

Hi, the one I took is a OEM Siemens GM part 90492061 made in france. Is not the same is it?
« Last Edit: 27 July 2025, 19:11:47 by kaisergaragerpt »
Logged

kaisergaragerpt

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • Portugal
  • Posts: 12
    • Omega b
    • View Profile
Re: x25xe wont start on my 1998 omega b
« Reply #8 on: 27 July 2025, 19:49:35 »
Logged

kaisergaragerpt

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • Portugal
  • Posts: 12
    • Omega b
    • View Profile
Re: x25xe wont start on my 1998 omega b
« Reply #9 on: 13 August 2025, 16:19:43 »
Quote from: Doctor Gollum on 26 July 2025, 23:16:56
Dis pack failure?

It's definitely a 'thing'... They fail over time and they really don't like water.

New dis module installed and the same 2 and 5 cylinders.

Could it be the leads?

Regards
Logged

tunnie

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Surrey
  • Posts: 37593
    • Zafira Tourer & BMW 435i
    • View Profile
Re: x25xe wont start on my 1998 omega b
« Reply #10 on: 13 August 2025, 17:05:39 »
Swap a lead over, does the fault move?
Logged

kaisergaragerpt

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • Portugal
  • Posts: 12
    • Omega b
    • View Profile
Re: x25xe wont start on my 1998 omega b
« Reply #11 on: 14 August 2025, 17:27:10 »
Quote from: tunnie on 13 August 2025, 17:05:39
Swap a lead over, does the fault move?

It stays the same 5 2, I'm afraid this going to be a pain :-\
Logged

kaisergaragerpt

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • Portugal
  • Posts: 12
    • Omega b
    • View Profile
Re: x25xe wont start on my 1998 omega b
« Reply #12 on: 15 August 2025, 10:53:27 »
Not the leads nor sparkplugs. Could it be the connector?the loom?
Logged

Doctor Gollum

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • In a colds and darks puddleses
  • Posts: 30176
  • If you can't eat them, join them...
    • Feetses.
    • View Profile
Re: x25xe wont start on my 1998 omega b
« Reply #13 on: 15 August 2025, 17:21:40 »
Quote from: kaisergaragerpt on 14 August 2025, 17:27:10
Quote from: tunnie on 13 August 2025, 17:05:39
Swap a lead over, does the fault move?

It stays the same 5 2, I'm afraid this going to be a pain :-\
Which leads did you swap?

3 and 6 might not reach 2/5 and like wise 2/5 might not reach 1/4.

If you don't know when they were last replaced, that's probably your best starting point..they do degrade over time.
Logged
Onanists always think outside the box.

kaisergaragerpt

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • Portugal
  • Posts: 12
    • Omega b
    • View Profile
Re: x25xe wont start on my 1998 omega b
« Reply #14 on: 15 August 2025, 18:54:26 »
Quote from: Doctor Gollum on 15 August 2025, 17:21:40
Quote from: kaisergaragerpt on 14 August 2025, 17:27:10
Quote from: tunnie on 13 August 2025, 17:05:39
Swap a lead over, does the fault move?

It stays the same 5 2, I'm afraid this going to be a pain :-\
Which leads did you swap?

3 and 6 might not reach 2/5 and like wise 2/5 might not reach 1/4.

If you don't know when they were last replaced, that's probably your best starting point..they do degrade over time.

I'm afraid is not about the leads at all.
I.e. I removed the 5 and put the 3 in its place instead, leaving the 3 null and ecu presented the same readings 5+2

This is something else don't know what tho
« Last Edit: 15 August 2025, 18:56:15 by kaisergaragerpt »
Logged
Pages: [1] 2  All   Go Up
« previous next »
 

Page created in 0.016 seconds with 17 queries.