Topic: 3 button key fobs for vectra. (Read 581 times)

robbo299 · « **on:** 26 October 2008, 23:50:06 »

Hi, Anyone on here who can give me some advice regarding replacement housings for the 3 button key fob for a vectra. My brother in law has an '05 vectra and on one of his key fobs the rubber buttons are badly worn, sometimes it doesn't operate properly. He has replaced the battery but the fob is still playing up. Is it possible to just change the case and refit the gubbings and the horseshoe blade? I have seen loads of 2 button replacement fobs and cases on fleebay, but only a couple of 3 button fobs. These were £20+ and needed reprogramming. Just wondered if it was possible to buy just a replacement case, without the control unit, and where from. Thanx.

P.S. Read the thread about 3 button fobs for the Omega in the FAQ section but don't know if these are the same.

TheBoy · « **Reply #1 on:** 27 October 2008, 07:48:48 »

the root cause will be buggered switches under the rubber

Martin_1962 · « **Reply #2 on:** 27 October 2008, 08:34:13 »

Post a picture of the insides

robbo299 · « **Reply #3 on:** 27 October 2008, 12:07:30 »

Thanx for replies. Just off to work in a min. Will see him Wednesday and get photo and any details marked on the fob.

News:

Author Topic: 3 button key fobs for vectra. (Read 581 times)

robbo299

3 button key fobs for vectra.

TheBoy

Re: 3 button key fobs for vectra.

Martin_1962

Re: 3 button key fobs for vectra.

robbo299

Re: 3 button key fobs for vectra.