Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please play nicely.  No one wants to listen/read a keyboard warriors rants....

Pages: 1 2 [3] 4  All   Go Down

Author Topic: MV6 - who says V6 Head Gaskets never fail?!  (Read 14106 times)

0 Members and 1 Guest are viewing this topic.

Marks DTM Calib

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • West Bridgford
  • Posts: 34107
  • Git!
    • View Profile
Re: MV6 - who says V6 Head Gaskets never fail?!
« Reply #30 on: 02 June 2009, 08:18:57 »
No need to skim but, you can see the corrosion damage around the edge of the coolant ways across the whole head.

The place on the left where its worse is actually between 2 water ways.

The most I might do is put a wipe of the green snot in that area (a technique used by Vx at the factory).

This is a pic of Mick Dundees which has had the coolant serviced very well on 100K + miles.



Note how much better the coolant ways are.

Just goes to show (yet again) the importance of proper servicing.
Logged

Marks DTM Calib

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • West Bridgford
  • Posts: 34107
  • Git!
    • View Profile
Re: MV6 - who says V6 Head Gaskets never fail?!
« Reply #31 on: 02 June 2009, 08:20:47 »
Quote
Was the area of failure the same as the area of dark grey?  If yes, then a very very light skim may suffice but remember the coolant bridge if the engine shop gets too keen. The head gasket is also designed to take up very minor imperfections by its very design...

Personally, if MDTM says dont skim then I wouldn't unless really neccessary....


Indeed, the major benefit of a composite gasket and why modern metal layer gaskets have a polymer coat to.
Logged

markey mark

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • SLady bitshorpe north lincs
  • Posts: 4236
  • banned for repeatedly reneaging on deals.
    • View Profile
Re: MV6 - who says V6 Head Gaskets never fail?!
« Reply #32 on: 02 June 2009, 09:55:23 »
Quote
Quote
Looks like its coming along nicely, should be for sale by the end of June? ;)  ::)

No chance - she's mine ;D

Markey - out of interest, why would you skim? No distortion or serious pitting etc - I guess after 150k miles, you won't be able to see your face in it?  :-/

just so its proper flat and were that dark patch is i wouldnt want to risk it will all the other work your doing james  :y
Logged

Kevin Wood

  • Global Moderator
  • *****
  • Offline Offline
  • Gender: Male
  • Alton, Hampshire
  • Posts: 36497
    • Jaguar XE 25t, Westfield
    • View Profile
Re: MV6 - who says V6 Head Gaskets never fail?!
« Reply #33 on: 02 June 2009, 11:41:41 »
Quote
Quote
Looks like its coming along nicely, should be for sale by the end of June? ;)  ::)

No chance - she's mine ;D

Markey - out of interest, why would you skim? No distortion or serious pitting etc - I guess after 150k miles, you won't be able to see your face in it?  :-/

Here we go again! :D... I bet you a Chicken Jalfrezi, Pilau Rice and a Garlic Naan oh, and a pint of Kingfisher that....

 ;)

kevin
Logged
Tech2 services currently available. See TheBoy's price list: http://theboy.omegaowners.com/

Martin_1962

  • Guest
Re: MV6 - who says V6 Head Gaskets never fail?!
« Reply #34 on: 02 June 2009, 13:19:06 »
OK James will sell in August ;D
Logged

Kevin Wood

  • Global Moderator
  • *****
  • Offline Offline
  • Gender: Male
  • Alton, Hampshire
  • Posts: 36497
    • Jaguar XE 25t, Westfield
    • View Profile
Re: MV6 - who says V6 Head Gaskets never fail?!
« Reply #35 on: 02 June 2009, 13:34:51 »
Quote
OK James will sell in August ;D

Keeping this one long-term, you reckon? :D
Logged
Tech2 services currently available. See TheBoy's price list: http://theboy.omegaowners.com/

Martin_1962

  • Guest
Re: MV6 - who says V6 Head Gaskets never fail?!
« Reply #36 on: 02 June 2009, 14:08:13 »
Quote
Quote
OK James will sell in August ;D

Keeping this one long-term, you reckon? :D


He has said that about at least 3 cars since I have known him, started with the GLS 2.0 trying to be an Elite, and then the STMO0123 2.5 CDX Facelift with LPG now owned by Phate123.

Mind you I did get 2 or 3 merged into one :)
Logged

Kevin Wood

  • Global Moderator
  • *****
  • Offline Offline
  • Gender: Male
  • Alton, Hampshire
  • Posts: 36497
    • Jaguar XE 25t, Westfield
    • View Profile
Re: MV6 - who says V6 Head Gaskets never fail?!
« Reply #37 on: 02 June 2009, 14:17:23 »
Quote
Quote
Quote
OK James will sell in August ;D

Keeping this one long-term, you reckon? :D


He has said that about at least 3 cars since I have known him, started with the GLS 2.0 trying to be an Elite, and then the STMO0123 2.5 CDX Facelift with LPG now owned by Phate123.

Mind you I did get 2 or 3 merged into one :)

Then there was the 2.0 LPG'd Estate, facelift 3.0 Elite, Range Rover, Peugeot and probably a few more... :D
Logged
Tech2 services currently available. See TheBoy's price list: http://theboy.omegaowners.com/

JamesV6CDX

  • Omega Queen
  • *****
  • Offline Offline
  • Gloucestershire/Buckinghamshire
  • Posts: 16658
    • Omega 3.2 Retail MV6 LPG
    • View Profile
Re: MV6 - who says V6 Head Gaskets never fail?!
« Reply #38 on: 02 June 2009, 17:03:36 »
I get bored when I run out of things to fix!  ;D
Logged

Varche

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • middle of Andalucia
  • Posts: 14138
  • What is going to break next?
    • Golf Estate
    • View Profile
Re: MV6 - who says V6 Head Gaskets never fail?!
« Reply #39 on: 02 June 2009, 18:30:38 »
Right when you have fixed everything on this car you can swap it for mine (plus 200euros negotiable) and then you need never buy another car! (and it has just had the cambelt changed).

Don't hang around though as the offer won't be there for ever.  :)

El varche
Logged
The biggest joke on mankind is that computers have started asking humans to prove that they aren’t a robot.

JamesV6CDX

  • Omega Queen
  • *****
  • Offline Offline
  • Gloucestershire/Buckinghamshire
  • Posts: 16658
    • Omega 3.2 Retail MV6 LPG
    • View Profile
Re: MV6 - who says V6 Head Gaskets never fail?!
« Reply #40 on: 03 June 2009, 22:46:53 »
Taking a break - as interest faded a bit tonight.

Fitted all the inlet valves and seals in the 246 head - only to find a stem seal spring on the bench. So - had to strip them out again - and found a stem seal with a spring missing.

Ho hum - changed that seal - all done

2-4-6 head is rebuild, apart from the manifold - starting on 1-3-5 head tomorrow night.

Hope to have them ready to fit, at the weekend...

These stem seals, from autovaux - are black - is that OK? They usually are green, IME... 
Logged

Andy B

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Bury Lancs
  • Posts: 39895
    • ML350 TDM SmartRoadster
    • View Profile
Re: MV6 - who says V6 Head Gaskets never fail?!
« Reply #41 on: 03 June 2009, 22:51:40 »
Quote
......
Fitted all the inlet valves and seals in the 246 head - only to find a stem seal spring on the bench. So - had to strip them out again - and found a stem seal with a spring missing.
 ....... 

Seems like a recurring theme!  ;)  ;)  ;) :y  :y  :y  :y
Logged

JamesV6CDX

  • Omega Queen
  • *****
  • Offline Offline
  • Gloucestershire/Buckinghamshire
  • Posts: 16658
    • Omega 3.2 Retail MV6 LPG
    • View Profile
Re: MV6 - who says V6 Head Gaskets never fail?!
« Reply #42 on: 03 June 2009, 22:54:15 »
Quote
Quote
......
Fitted all the inlet valves and seals in the 246 head - only to find a stem seal spring on the bench. So - had to strip them out again - and found a stem seal with a spring missing.
 ....... 

Seems like a recurring theme!  ;)  ;)  ;) :y  :y  :y  :y

At least I noticed it before I fitted the beggar to the car  ;D
Logged

Andy B

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Bury Lancs
  • Posts: 39895
    • ML350 TDM SmartRoadster
    • View Profile
Re: MV6 - who says V6 Head Gaskets never fail?!
« Reply #43 on: 03 June 2009, 23:03:40 »
Quote
Quote
Quote
......
Fitted all the inlet valves and seals in the 246 head - only to find a stem seal spring on the bench. So - had to strip them out again - and found a stem seal with a spring missing.
 ....... 

Seems like a recurring theme!  ;)  ;)  ;) :y  :y  :y  :y

At least I noticed it before I fitted the beggar to the car  ;D

 :y :y :y Not a mistake you'll ever do again I think.  :y  :y
Logged

JamesV6CDX

  • Omega Queen
  • *****
  • Offline Offline
  • Gloucestershire/Buckinghamshire
  • Posts: 16658
    • Omega 3.2 Retail MV6 LPG
    • View Profile
Re: MV6 - who says V6 Head Gaskets never fail?!
« Reply #44 on: 03 June 2009, 23:10:29 »
Quote
Quote
Quote
Quote
......
Fitted all the inlet valves and seals in the 246 head - only to find a stem seal spring on the bench. So - had to strip them out again - and found a stem seal with a spring missing.
 ....... 

Seems like a recurring theme!  ;)  ;)  ;) :y  :y  :y  :y

At least I noticed it before I fitted the beggar to the car  ;D

 :y :y :y Not a mistake you'll ever do again I think.  :y  :y

Do you have any idea how many time I've counted these followers?  ;D ;D
Logged
Pages: 1 2 [3] 4  All   Go Up
« previous next »
 

Page created in 0.014 seconds with 17 queries.