Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Search the maintenance guides for answers to 99.999% of Omega questions

Pages: [1]   Go Down

Author Topic: Stone chip repairs  (Read 955 times)

0 Members and 1 Guest are viewing this topic.

albitz

  • Guest
Stone chip repairs
« on: 25 May 2010, 22:39:08 »

I have tried repairing these on my previous Omega and on my Merc by buying the little touch up bottles from the relevant dealer and touching up the small chips and scratches, but on each occasion the paint (dark green on both cars) comes out much too dark - almost Black.
Anyone have any tips/secrets as to how to do a better job on this. :-/
Logged

Radar

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • Berkshire
  • Posts: 1378
    • Elite 2.5 Auto
    • View Profile
Re: Stone chip repairs
« Reply #1 on: 25 May 2010, 23:22:36 »

Just guessing but what about if you dilute very slightly? Also did you use the clear lacquer afterwards?
Logged

mudflap

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Male
  • NW London UK
  • Posts: 353
  • My Green Goddess
    • View Profile
Re: Stone chip repairs
« Reply #2 on: 26 May 2010, 11:26:03 »

Never had much success with those touch up bottles either, I usually wet & dry the whole area where the chips are around the front bumper or mask off wherever, go over all the chips with a very thin layer of Isopon, dry till hard, wet & dry again, spray undercoat, wet & dry, a few thin coats of warmed gloss paint (not in cold weather as the laquer reacts), a coat of warmed laquer and looks like new!  :)


« Last Edit: 26 May 2010, 11:27:12 by mudflap »
Logged
If it's got tits or wheels  it's bound to give you trouble   

cem_devecioglu

  • Guest
Re: Stone chip repairs
« Reply #3 on: 26 May 2010, 12:48:36 »

I have seen some professional applications with touch up paint.. generally they lower-lighten the color tone to match as the paint even if same code will be darker.. after it dries they sand it.. then apply laquer.. but still visible..  :-/

I'm afraid best practice is to re-paint..
Logged
Pages: [1]   Go Up
 

Page created in 0.01 seconds with 16 queries.