Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to OOF

Pages: [1]   Go Down

Author Topic: Corsa C MAF sensor readings  (Read 1386 times)

0 Members and 1 Guest are viewing this topic.

CaptainZok

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • Bolton
  • Posts: 8093
  • Victim of Cyberbullying.
    • 3.2 MV6 Estate
    • View Profile
Corsa C MAF sensor readings
« on: 08 August 2010, 19:05:02 »
Just been playing with a Corsa C, the little 3 cylinder 1.0 sewing machine jobbies.
Idle is a little rough, and on looking at live data the MAF is showing 0kg/m airflow at idle (c1000RPM) but shows a value when the engine is revved.
Unplugging the MAF seems to drop idle to around 650 and improves smoothness somewhat so anyone know if it should show no airflow at idle or is that figure normal for these engines?
Logged
PM me for code reading/clearing
TuBy's new whipping boy.

PC Techy

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Bath
  • Posts: 66
    • View Profile
Re: Corsa C MAF sensor readings
« Reply #1 on: 09 August 2010, 11:37:47 »
according to autodata disc should have 1 volt between pins 3 and 5 with ignition on, 1.3v at idle and 4.3 at full throttle. be worth checking you have a voltage reading at idle.
Logged
DUE TO CUT BACKS, THE LIGHT AT THE END OF THE TUNNEL HAS BEEN SWITCHED OFF
Pages: [1]   Go Up
« previous next »
 

Page created in 0.01 seconds with 16 queries.