Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[symes]

finished setting my double pumper carb on my classic and fitted new sunroof switch light bulb on the mig

[omega3000]

Left it at home and cycled 15 miles to have a pint with my mates instead. Knackered. No moon tonight. I need a  brighter light on the bike. Nearly missed a couple of bends on the way home.

 

[05omegav6]

Fitted a pair of Pedders Monaro rear subframe poly bushes Courtesy of Messrs Monkfish

Shall report back once I've driven it in anger, but first impressions are promising 

[feeutfo]

Good news Al. Fingers crossed.

[05omegav6]

Replaced both front ball joints, only 3 rivets and 4 bolts, piece of pish.... not still only managed to break 2drill bits, one centre punch and bend a reasonably sized drift

Swapped the outer track rods and drop links whilst there   all ticketyboo except for being unable to set up the front end due to a seized adjuster, would appear to be welded to the os inner trackrod end

Rear end now feels like it's actually attached to the car again, nice and taught

[JimE]

replaced the Steering Idler Arm, surprised at the difference it made!.

[TheBoy]

Replaced both front ball joints, only 3 rivets and 4 bolts, piece of pish.... not still only managed to break 2drill bits, one centre punch and bend a reasonably sized drift

Swapped the outer track rods and drop links whilst there   all ticketyboo except for being unable to set up the front end due to a seized adjuster, would appear to be welded to the os inner trackrod end

Rear end now feels like it's actually attached to the car again, nice and taught

I found it quite easy, although I did break the DRILL (not bit). Gutted.

[05omegav6]

My drill takes few prisoners, mains powered Bosch... didn't try it on the hammer setting might have helped shake the rivets loose, trusty Dremel saved the day .

Next time I might just take the arms off and be done with it

[TheBoy]

My drill takes few prisoners, mains powered Bosch... didn't try it on the hammer setting might have helped shake the rivets loose, trusty Dremel saved the day .

Next time I might just take the arms off and be done with it

Mine was my trusty old, indestructable Wolf, that was a present from my old boss

The chuck and most of the gearbox stayed on wishbone, motor and housing came off in my hand

[05omegav6]

  'Oh cock' springs to mind... was quite pleased with myself, managed to get one of the drill bits to shatter into 4

[Manual Elite V6]

Today I had new tyres fitted to the front of the Omega, I then replace the rear shoes and cylinders and adjusted them up on my mates Puma, also treated it to a brake fluid change for him.

[BazaJT]

Well,after finishing work I hoovered the Jag,then cleaned interior plastics etc.and polished inside of windows.Returned home and removed power sounder from Omega.

[ozzycat]

nothing just sat with my feet up

[TheBoy]

Fixed the indicators on teh Kwaka

[hotel21]

Sat on my arse drinking the red wine that went with an extended rustic lunch of local bread and cheese whilst looking at the mig against a fine seaside backdrop.

Must change the oil and filters sometime soon......