Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[benjy44]

i think there 10mm

[PhilRich]

its a mv6 buts says mv6 elite on logbook

Its ex-police so its basically GLS spec inside but with HID's and MV6 running gear

It appears to be an ex Met car 

[benjy44]

yeah i think it is picked it up from kent it goes like a missile

[humbucker]

interesting, i've got those astra se2 wheels on my mk4 coupe, nice wheels but as the offset is ET49 or something i didn't think they'd fit an omega properly?! well done!!

[Stu C]

Mmmm  White   Looks very nice indeed

[feeutfo]

Its the camber that needs setting, tracking will will not affect the camber angle.

[Bill_Oddie]

Looks like youre missing a big pram spoiler on the rear and some aero wing mirrors to compliment what you have already done.

These would probably suit the boy racer style lowering modification and the ridiculous looking astra wheels that belong on an astra.

[benjy44]

ok then daft lad

[ted_one]

There's nothing boy racer about the car it looks right! 

[joshwyatt]

This Omega was in service with The Metropolitan Police.
An 'in service' picture below;

[millwall]

Looks like youre missing a big pram spoiler on the rear and some aero wing mirrors to compliment what you have already done.

These would probably suit the boy racer style lowering modification and the ridiculous looking astra wheels that belong on an astra.

bill oddie

[bellers]

looks well. omegas are very nice in white. over here in northern ireland they were popping up everywhere estates included. now the "in" colour seems to be black

never listen to bills comment he said that because mine was lowered i should fit a big kit and included a picture of a car with cardboard kit stuck on. each to their own and everyone is intitled to an opinion. you have to take the bad comments aswell 

[X3 OXE]

Looks smart, ive got ex police too but lowered 40mm on 19" wheels.

Regarding the front camber. Who ever lowered it obviously didnt pull the top of the hub out before tightening up the 2 shocks bolts. this will correct your camber. Mine was the same when i first lowered it then i figured it out.

So just undo the two bottom shock bolts, pull the top of the hub/disc towards you then re tighten bolts.

Hope this helps

[sotmh]

Who says there's no solution to any problem!!!.  This is what I like to see instead of negativity  .

Well done X30 0XE

[X3 OXE]

Thanks  8-) [smiley=beer.gif]