Topic: Omega 3.0L V6 piston compression (Read 1711 times)

bexandpower · « **on:** 05 December 2006, 18:06:22 »

Hi guys,

Does anyone know what the piston compression should be on a 3.0L V6 engine???

Markjay · « **Reply #1 on:** 05 December 2006, 18:22:29 »

No... but the general rule about compression is not if it is high or low, but if it is the same for all cylinders.

bexandpower · « **Reply #2 on:** 05 December 2006, 18:29:00 »

was just wondering if anyone had done one and what the results were?

rpont · « **Reply #3 on:** 05 December 2006, 19:42:10 »

Haynes says 12 to 15 bar (174 to 218 psi), max difference between any two cylinders 1 bar (15 psi).

JasonH · « **Reply #4 on:** 05 December 2006, 21:11:30 »

Autodata says 12-15 bar.

bexandpower · « **Reply #5 on:** 05 December 2006, 22:06:59 »

cool cool cheers guys. Just needed some info to take to the garage with me tomorrow.