Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to OOF

Pages: [1] 2  All   Go Down

Author Topic: 2.2 - Saga  - FYI  (Read 2132 times)

0 Members and 1 Guest are viewing this topic.

JeffT

  • Newbie
  • *
  • Offline Offline
  • Glasgow
  • Posts: 19
    • View Profile
2.2 - Saga  - FYI
« on: 18 January 2007, 09:54:16 »
EML light been coming on occasionaly for last 6 months with no ill effect. Exhaust been blowing a bit (will be sorted this week) However, last 3-4 weeks car been down on power and will not idle from cold - stalls and seems to mis-fire when driving.
Paid dealer in Glasgow £63 for Tech 2 read out. Came up with P0170 for lean exhaust but could not be 100% as hole in exhaust - quoted £500 plus for exahaust ;D
Anyhoo, said no thanks, picked up car (still running like a pig) and drove home. Took out MAF, got a cotton bud soaked in solvent and wiped the three sensor wires inside MAF (some dirt left on bud) Put MAF back in and started car. Car was cold but idled perfectly. Took for a test drive - drives superb. Wife drove it to work and back yesterday (motorway speeds and around 50-60 miles) no problem. May be a bit early but cleaning wires or maybe just re-connecting MAF in to wiring harness has made a difference.
MOT due Monday, I'll fit new front discs and pads (done them many times on other cars - anything to watch for?) But need new OSR coil spring (broken) - any one know where to go for one?
Other jobs to do soon is replace cam shaft gasket and seals (got oil in #2 plug well) and clean all breather pipes. If anyone has Vauxhall part number for required gaskets for these 2 jobs it would be a big help.
Thanks  - great forum - keep it up :y
Logged

Markjay

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • London
  • Posts: 5417
    • View Profile
Re: 2.2 - Saga  - FYI
« Reply #1 on: 18 January 2007, 10:15:59 »
Our pleasure. That’ll be £63 please, make the cheque payable to omegaowners.com…  ;D
« Last Edit: 18 January 2007, 10:16:29 by markjay »
Logged
Alas, no more Omegas....

Markjay

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • London
  • Posts: 5417
    • View Profile
Re: 2.2 - Saga  - FYI
« Reply #2 on: 18 January 2007, 10:18:53 »
Glad you got it sorted  :y
Logged
Alas, no more Omegas....

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 106841
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: 2.2 - Saga  - FYI
« Reply #3 on: 18 January 2007, 10:20:50 »
For brakes, you need to buy 2 new wear sensors (X reg will have one each side), as you won't remove old ones without braking them...
Logged
Grumpy old man

Auto Addict

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • North Birmingham
  • Posts: 13554
  • Back to Vx to keep TB happy
    • Astra K Elite ST
    • View Profile
Re: 2.2 - Saga  - FYI
« Reply #4 on: 18 January 2007, 10:32:01 »
Result :y
Logged
I like red cars

Markjay

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • London
  • Posts: 5417
    • View Profile
Re: 2.2 - Saga  - FYI
« Reply #5 on: 18 January 2007, 10:34:38 »
Quote
For brakes, you need to buy 2 new wear sensors (X reg will have one each side), as you won't remove old ones without braking them...

…before you ask AA, yes I do have a picture…:  ;D

« Last Edit: 18 January 2007, 10:35:55 by markjay »
Logged
Alas, no more Omegas....

nixoro

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Hitchin, Herts
  • Posts: 2902
    • View Profile
Re: 2.2 - Saga  - FYI
« Reply #6 on: 18 January 2007, 10:36:34 »
Thats is a result :y

Logged

nixoro

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Hitchin, Herts
  • Posts: 2902
    • View Profile
Re: 2.2 - Saga  - FYI
« Reply #7 on: 18 January 2007, 10:39:00 »
Quote
Quote
For brakes, you need to buy 2 new wear sensors (X reg will have one each side), as you won't remove old ones without braking them...

…before you ask AA, yes I do have a picture…:  ;D


Dont suppose you have the part numbers for the O' rings and gasket for the 2.2
(I think the 2.2 and 2.0 gaskets are the same)

Would post myself but I have since binned the packaging :-[
« Last Edit: 18 January 2007, 10:39:45 by nixoro »
Logged

Markjay

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • London
  • Posts: 5417
    • View Profile
Re: 2.2 - Saga  - FYI
« Reply #8 on: 18 January 2007, 10:40:40 »
Quote
Quote
Quote
For brakes, you need to buy 2 new wear sensors (X reg will have one each side), as you won't remove old ones without braking them...

…before you ask AA, yes I do have a picture…:  ;D


Dont suppose you have the part numbers for the O' rings and gasket for the 2.2
(I think the 2.2 and 2.0 gaskets are the same)

Would post myself but I have since binned the packaging :-[

Sorry, I never did manage to get EPC to work on my PC...  :'(
Logged
Alas, no more Omegas....

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 106841
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: 2.2 - Saga  - FYI
« Reply #9 on: 18 January 2007, 10:43:34 »
I haven't reinstalled EPC since I rebuilt laptop...
Logged
Grumpy old man

nixoro

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Hitchin, Herts
  • Posts: 2902
    • View Profile
Re: 2.2 - Saga  - FYI
« Reply #10 on: 18 January 2007, 10:43:56 »
Quote
Quote
Quote
Quote
For brakes, you need to buy 2 new wear sensors (X reg will have one each side), as you won't remove old ones without braking them...

…before you ask AA, yes I do have a picture…:  ;D


Dont suppose you have the part numbers for the O' rings and gasket for the 2.2
(I think the 2.2 and 2.0 gaskets are the same)

Would post myself but I have since binned the packaging :-[

Sorry, I never did manage to get EPC to work on my PC...  :'(

Just wondered :y shall see if I can find my receipt later maybe lucky :-/
Logged

Markjay

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • London
  • Posts: 5417
    • View Profile
Re: 2.2 - Saga  - FYI
« Reply #11 on: 18 January 2007, 10:49:25 »
Quote
Quote
Quote
Quote
Quote
For brakes, you need to buy 2 new wear sensors (X reg will have one each side), as you won't remove old ones without braking them...

…before you ask AA, yes I do have a picture…:  ;D


Dont suppose you have the part numbers for the O' rings and gasket for the 2.2
(I think the 2.2 and 2.0 gaskets are the same)

Would post myself but I have since binned the packaging :-[

Sorry, I never did manage to get EPC to work on my PC...  :'(

Just wondered :y shall see if I can find my receipt later maybe lucky :-/

What??? you do not keep all your receipts nicely filed in a folder??? :o

I have mine also from the previous meega...  ;D

If any one here has a 2.5 97R Reflection in Star Silver it might just be mine - give me a shout and I'll post the receipts to you...  
« Last Edit: 18 January 2007, 10:50:42 by markjay »
Logged
Alas, no more Omegas....

nixoro

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Hitchin, Herts
  • Posts: 2902
    • View Profile
Re: 2.2 - Saga  - FYI
« Reply #12 on: 18 January 2007, 10:52:33 »
Quote
Quote
Quote
Quote
Quote
Quote
For brakes, you need to buy 2 new wear sensors (X reg will have one each side), as you won't remove old ones without braking them...

…before you ask AA, yes I do have a picture…:  ;D


Dont suppose you have the part numbers for the O' rings and gasket for the 2.2
(I think the 2.2 and 2.0 gaskets are the same)

Would post myself but I have since binned the packaging :-[

What??? you do not keep all your receipts nicely filed in a folder??? :o

I have mine also from the previous meega...  ;D

If any one here has a 2.5 97R Reflection in Star Silver it might just be mine - give me a shout and I'll post the receipts to you...  


Sorry, I never did manage to get EPC to work on my PC...  :'(

Just wondered :y shall see if I can find my receipt later maybe lucky :-/

Well yeah most receipt go into the folder but the particular one I am thinking of I'm sure I left at my folks as at the time I did 2 cover gasket changes and my dad paid. Hopefully he hasn't thrown it out
Logged

jonathanh

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • coventry
  • Posts: 1199
    • View Profile
Re: 2.2 - Saga  - FYI
« Reply #13 on: 18 January 2007, 13:29:51 »
Re the OSR coil spring.  I'd suggest aftermarket: KYB or Sach.  They should be around £30 each.  
Many on here suggest replacing as a pair and VX will only sell as a pair for about £160 or something like that (I sort of stopped listening when I heard one hundred......)

They're fairly easy to change - I think there may be a how to someone.  Certainly there is a thread around on it.  

Logged
parking near Birmingham airport for members with +250 posts.  PM for info

Taxi_Driver

  • Guest
Re: 2.2 - Saga  - FYI
« Reply #14 on: 18 January 2007, 13:30:44 »
Quote
Quote
Quote
For brakes, you need to buy 2 new wear sensors (X reg will have one each side), as you won't remove old ones without braking them...

…before you ask AA, yes I do have a picture…:  ;D


Dont suppose you have the part numbers for the O' rings and gasket for the 2.2
(I think the 2.2 and 2.0 gaskets are the same)

Would post myself but I have since binned the packaging :-[

Sorry i dont have the packaging either  :(

I just asked the vx dealer parts guy for cam cover gasket and o rings.......but then he has been there for years.....and knows his way around the EPC...my dealer didnt have the gasket in stock and had to order one in...so you might have to wait a day or so to get one.
Logged
Pages: [1] 2  All   Go Up
« previous next »
 

Page created in 0.038 seconds with 21 queries.